(x) S/N 90H6151

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message bassconbeatz New Username: bassconbeatz Post Number: 1 Registered: 11-2007 Posted on Monday, November 26, 2007 - 7:08 pm:    Hi, Can you tell me something about my new Elan. I've always wanted an Alembic, and I finally have one. bassconbeatz New Username: bassconbeatz Post Number: 2 Registered: 11-2007 Posted on Monday, November 26, 2007 - 8:04 pm:    Is there a tool set for adusting the truss rod available? If there is, how much, and where can I buy it? Thanks, Roy lidon2001 Advanced Member Username: lidon2001 Post Number: 363 Registered: 4-2005 Posted on Monday, November 26, 2007 - 8:36 pm:    Welcome Roy, It's a simple 1/4" wrench. You probably have one in your tool kit. Available at your local hardware store, or here in the Alembic Store too. A well thought procedure for neck adjustment is located somehwere in the FAQ's. tbrannon Senior Member Username: tbrannon Post Number: 591 Registered: 11-2004 Posted on Monday, November 26, 2007 - 9:41 pm:    Welcome Roy- I saw the pictures on talkbass- beautiful Elan. Before you start working those truss rods, I'd suggest having a read of Joey's setup post in the FAQ section. The dual truss rods, bridge design and adjustable nut are awesome in terms of getting the action right where you want it, but it can be overwhelming at first. Enjoy~ (Message edited by tbrannon on November 26, 2007) bassconbeatz New Username: bassconbeatz Post Number: 3 Registered: 11-2007 Posted on Monday, November 26, 2007 - 10:14 pm:    Thanks guys. I'm glad I was able to find this site. Hey T, thanks for link for the set-up site. I'll definitly check it out before fideling around with it. mica Moderator Username: mica Post Number: 5361 Registered: 6-2000 Posted on Tuesday, June 24, 2008 - 4:04 pm:    history details posted here