| Author | Message | ||
| endryq
Junior Username: endryq Post Number: 34 Registered: 3-2004 |
Hey folks! I'm thinking about getting an Alembic F-2B, but there are some questions: There's no D.I. Out. I play alot of live shows and a D.I. Out is a must for me. Is it possible to put a D.I. Box between the F-2B and the power amp? Putting it between Bass and the Preamp is not an option because I want to get the full effect ;-). There is no FX loop, so how can I put some FX in this setup? How do Alembicicans usually handle this? Would be nice if someone could help me! Thanks! | ||
| davehouck
Moderator Username: davehouck Post Number: 5725 Registered: 5-2002 |
In my setup, the effects are after the F-2B, and the DI is after the effects and before the power amp. | ||
| wayne
Intermediate Member Username: wayne Post Number: 154 Registered: 5-2002 |
I don't run effects, but I use the mono out to the power amp, and send the A & B outs through a Radial JDI to the FOH. Has worked very well so far. I get post EQ to the FOH and he's happy with the signal clarity and level. Before running this set up, I conversed with Alembic. There's no problem with running all 3 outs at the same time, you just may notice a drop in "volume". I have not. Based on what I've heard (beware, most of it I don't fully understand), to get the full output from the F2B, be sure that the input impedance of whatever the F2B is feeding is at least 10K ohms. FWIW.....my $.02 C-Ya.........wayne |
