Wiring diagram Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through March 08, 2009 » Wiring diagram « Previous Next »

Author Message
nikobask
Junior
Username: nikobask

Post Number: 16
Registered: 12-2008
Posted on Friday, January 30, 2009 - 7:11 am:   Edit Post

Hi
I need a Signature bass wiring diagram !
i broke the volume and balance pots

Thank you very much
Niko
nikobask
Junior
Username: nikobask

Post Number: 18
Registered: 12-2008
Posted on Monday, February 02, 2009 - 9:51 am:   Edit Post

no one could send me a picture of the control cavity i don't know where i need to the solder the wires to the pan pot?
thanks
Niko

nicolaschelly (at) hotmail.com
davehouck
Moderator
Username: davehouck

Post Number: 7482
Registered: 5-2002
Posted on Monday, February 02, 2009 - 9:56 am:   Edit Post

Hi Nicolas; perhaps if you posted some pics of the problem, somebody here might be able to help identify which wires need to be soldered where.
nikobask
Junior
Username: nikobask

Post Number: 19
Registered: 12-2008
Posted on Monday, February 02, 2009 - 10:04 am:   Edit Post

nikobask
Junior
Username: nikobask

Post Number: 20
Registered: 12-2008
Posted on Monday, February 02, 2009 - 10:07 am:   Edit Post

when i tried to set up my vol pot it turnd on itself and broke the v pot and the pan pot's jumper broke too?
so i need a pan pot and a wiring scheme!

thanks all my Alembic friends
Mica forget to send me a Pic!!
nikobask
Junior
Username: nikobask

Post Number: 21
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 8:07 am:   Edit Post

nikobask
Junior
Username: nikobask

Post Number: 22
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 8:08 am:   Edit Post

nikobask
Junior
Username: nikobask

Post Number: 23
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 8:11 am:   Edit Post

Hi

it's terrific i need my bass quickly and i don't know how to do ?
the pan pot seems broken ?
maybe could i go direct without pan?

thanks to help me brothers ans sisters

Love
nikobask
Junior
Username: nikobask

Post Number: 24
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 12:04 pm:   Edit Post

Hey
can i have a pic of the signature cavity? it seems that a board lacks near the pan pot??
It's to hard living without my 5 i need it for my work ?

Thanks
mica
Moderator
Username: mica

Post Number: 5842
Registered: 6-2000
Posted on Tuesday, February 03, 2009 - 1:12 pm:   Edit Post

For the year of your Signature bass, there is no board that the pot mounts on. Here's a diagram of what you need to do when you get the replacement pot:

pan pot

As you can see, they came off in order - so it should be easy to navigate.

The terminals of the pot are probably still on the end of the wires I have labelled. You should not have them in the wiring when you reattach the terminals.

Edwin will confirm with me tomorrow about the pan pot - I'll let you know.
nikobask
Junior
Username: nikobask

Post Number: 25
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 1:18 pm:   Edit Post

cooool
the terminals are out (jumpers)


Mica is ther an upgrade for the signature electronics
or upgrade?

Hi from Paris
mica
Moderator
Username: mica

Post Number: 5843
Registered: 6-2000
Posted on Tuesday, February 03, 2009 - 2:12 pm:   Edit Post

Also, check that the nuts on the filter pots are not loose. Just make sure you know how to remove the knobs so you don't damage the pots.

It's probably a good idea to check the screws holding the straplocks in for the same reason. Over time the wood cells will compress slightly under pressure. Anything that you want to stay firmly attached needs to be check periodically.
nikobask
Junior
Username: nikobask

Post Number: 26
Registered: 12-2008
Posted on Tuesday, February 03, 2009 - 2:19 pm:   Edit Post

Thank you Mica
you are very nice !

Love
Niko

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration