| Author | Message | ||
| toddharris
Junior Username: toddharris Post Number: 16 Registered: 7-2008 |
Hi, Bought a re-finished series I bass that lost the serial number in the process - Harry (BunnyBass) believes the number was 143 and a year of 74 or 75. The base has a loveley maple top and back over what appears to be mahogany, brown pickups, and a scalloped brass nut. Would be grateful for any information and would be happy to send a picture if needed. Thanks, Todd | ||
| room037
Advanced Member Username: room037 Post Number: 261 Registered: 9-2003 |
Hi Todd, I reported SN 74-86 on prebious thread. I found it on eBay few years ago. I have 5 photo but these are not included SN photo, it was only in description. Please look 2 points: Top of the head : If the serial number info. is grined off, you should do next process. In the cavity : There is the number on pod. Mica will suggest more info. by this number. Good luck ! Eiji | ||
| toddharris
Junior Username: toddharris Post Number: 17 Registered: 7-2008 |
Dear Eiji, Thanks very much - that's great news and I will check when I get home tonight. I appreciate your taking time to let me know and am dying to know where this bass falls in the chronology of early bass guitars. Best regards, Todd  | ||
| dadabass2001
Senior Member Username: dadabass2001 Post Number: 1051 Registered: 6-2002 |
Hello Todd, That's a sweet looking Series I. Be sure to post more pics in the showcase section. The first part of your serial number is the year of manufacture, the second is its actual position in the sequence of Alembic instruments. Mike | ||
| toddharris
Junior Username: toddharris Post Number: 19 Registered: 7-2008 |
Bas(s)ed on Eiji's suggestion above, I've taken the following information off the pots and circuitry that was in the electronics cavity and added a picture. Again, Harry thought the number was -- 143 but couldn't be sure. Based on the scalloped nut and brown pickups I'm hoping to get close. Believe the body is flamed maple over walnut or possibly mahogany core. The identifying numbers are as follows - vol pots marked AB JA 1N200P103AA 10k-0HM TYPE J 3 position filter switch 0987 Cavity  Circuit Board  I've posted more pictures including the powerpack in the Series I gallery - thanks for any information anyou can provide. Todd | ||
| room037
Advanced Member Username: room037 Post Number: 262 Registered: 9-2003 |
Hi Todd, I think, your bass had some repair work on electronics. Please look this thread. This is my bass. There is the picture of cavity on 4th post. Hand writing number is showed on (round) filter pod. The square filter pods are newer or fitted other circuit like "signature" "Activator" etc. I don't know what means the number, but it's a specific. Can you find another hund writing number on circuit board ? Eiji | ||
| toddharris
Junior Username: toddharris Post Number: 20 Registered: 7-2008 |
Thanks Eiji, Looking at your thread above, I see the bass you refer to is an '82 and am guessing that things might have been somewhat different in 74 - 75 as far as parts went - hoping to hear from Mica as Harry (who I got the bass from) was pretty sure the electronics were original though I'm open to the idea that he may have been mistaken. Thanks again, Todd | ||
| toddharris
Junior Username: toddharris Post Number: 21 Registered: 7-2008 |
Reviewing the showcase of Series I basses, I seem to have found the same electronics on the following 1974 bass http://alembic.com/club/messages/411/35292.html?1168907689 | ||
| mica
Moderator Username: mica Post Number: 6856 Registered: 6-2000 |
Oh no! Not another 143! I think that makes 3 of them?! Maybe it's a different number, but it will be hard to identify with the records from that time, just a little index card with a few details scribbled on them. At least we have that! One thing I notice on your refinished bass is that the cavity looks awfully shiny - that many mean the silver conductive paint is not able to do its job. |
