CLASSICO pickup fitting Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through June 11, 2010 » CLASSICO pickup fitting « Previous Next »

Author Message
to_81_0190
Intermediate Member
Username: to_81_0190

Post Number: 124
Registered: 5-2006
Posted on Friday, December 25, 2009 - 4:30 pm:   Edit Post

I bought CLASSICO 93CB7776 in used. When I was taking pics for Show Case I found the pickup unit is not fixed to the body. Is this wrong or right?



Toshiaki
mica
Moderator
Username: mica

Post Number: 6518
Registered: 6-2000
Posted on Tuesday, December 29, 2009 - 12:32 pm:   Edit Post

I looked at the images in your Showcase thread too, Toshiaki. I think the pickup housing has been modified. We haven't made one with a Maple top as far as I know, and there shouldn't be screws on the face either. I would like to see what's inside the pickup housing if you get a change.

The bridge is also not original.
to_81_0190
Intermediate Member
Username: to_81_0190

Post Number: 129
Registered: 5-2006
Posted on Tuesday, December 29, 2009 - 4:50 pm:   Edit Post

Hi Mica, Thank you for the answer. I took pics inside of the bass. Then I found pickup housing has a tilt. I sent E-mail to the shop which I bought this, if they can ask about these things to previous owner.









Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration