Screw size for control cover Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through November 30, 2011 » Screw size for control cover « Previous Next »

Author Message
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 1184
Registered: 6-2002
Posted on Saturday, February 12, 2011 - 10:32 am:   Edit Post

I'm working on bringing my '78 guitar back to life, and the screws for the back control cavity cover have gone MIA.

What size should I look for (so I don't have to bring the guitar into the hardware store) ?

thanks all,
jon_jackson
Member
Username: jon_jackson

Post Number: 64
Registered: 12-2008
Posted on Saturday, February 12, 2011 - 2:59 pm:   Edit Post

Current size is 2-56 (NC) x 3/8". Not sure if they have changed sizes over the years.
mica
Moderator
Username: mica

Post Number: 7220
Registered: 6-2000
Posted on Monday, February 14, 2011 - 11:57 am:   Edit Post

Do you have threaded inserts or not?
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 1185
Registered: 6-2002
Posted on Monday, February 14, 2011 - 12:26 pm:   Edit Post

Yes I have the brass threaded inserts,
they look the same as the inserts on my '82 exploiter (which also has some lost screws).
Thanks Jon and Mica,

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration