Short scale Rotosounds Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through November 30, 2011 » Short scale Rotosounds « Previous Next »

Author Message
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2346
Registered: 6-2002
Posted on Tuesday, March 01, 2011 - 5:31 am:   Edit Post

I've just bought some short scale Rotosound strings for my SC Deluxe and the blue silky wrap stuff is resting on the nut. Am I OK to remove that or will removing that cause the outer wrap to unwravel?

Jazzyvee
terryc
Senior Member
Username: terryc

Post Number: 1514
Registered: 11-2004
Posted on Tuesday, March 01, 2011 - 7:23 am:   Edit Post

Jazzyvee..I don't think so, it is only there to protect the tuner capstans, the windings are firmly fixed to the core on most strings
pierreyves
Senior Member
Username: pierreyves

Post Number: 761
Registered: 11-2006
Posted on Tuesday, March 01, 2011 - 7:36 am:   Edit Post

Hi Jazzyvee, you can certainly remove it but you must buy for medium scale, not short scale next time :-) But, I want to know exactly what strings you bought ?
Thanx and best regards
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2347
Registered: 6-2002
Posted on Tuesday, March 01, 2011 - 2:40 pm:   Edit Post

Thanks Terryc, Pierre, the strings I bought are Rotosound RS66s Stainless Steel Swing bass strings 40, 50,75,90. The gauges seem very light and I only decided to try them out as they were in a clearance sale so cheap enough to try out.

Jazzyvee
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2348
Registered: 6-2002
Posted on Tuesday, March 01, 2011 - 4:21 pm:   Edit Post

Just put them on after removing the silk and they are really too light for me. The sound is very thin, with no body and the strings are too loose. I will change back to the alembic short scale strings when I next pick up the bass,

Jazzyvee
mario_farufyno
Senior Member
Username: mario_farufyno

Post Number: 603
Registered: 9-2008
Posted on Tuesday, March 01, 2011 - 4:29 pm:   Edit Post

Although I don't do this for years, never got any issue ripping off the silk wrapping (did twice).

You're not asking, but I've being using the GHS's Bassics that has no wrapping at all and always cut the excess. I don't like them making much more than 2 turns around post, so I cut the end and never got any problem with that.

Some people claim it can ruin the Strings, but I simply bend and cut it before inserting them inside de Posts (pegs?). Never saw a string unwravel and my strings never loosed sustain or tone by doing this...
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2349
Registered: 6-2002
Posted on Tuesday, March 01, 2011 - 11:13 pm:   Edit Post

Thanks Mario, I always measure the string length against the next tuning peg or the end of the headstock. So when cutting the E-string I measure it up to the A-string tuning peg and cut it at that point. For Installing the A-string I measure it up to the end of the headstock then cut it at that length. Then once I've poked the end down the centre of the tuning peg, there are enough wraps to keep the string firm after stretching in.

Jazzyvee
pierreyves
Senior Member
Username: pierreyves

Post Number: 762
Registered: 11-2006
Posted on Wednesday, March 02, 2011 - 12:27 am:   Edit Post

I was looking on rotosound web site, the string we need for SC basses are RS 66 M:
http://www.rotosound.com/string_guide.php
I use d'Addario EXL 170 M but I will try rotosound.
gtrguy
Advanced Member
Username: gtrguy

Post Number: 348
Registered: 9-2004
Posted on Wednesday, March 02, 2011 - 10:09 am:   Edit Post

I use the D'Addario EXL170M as well, but of course found out that it's the medium scale that will correctly fit an Alembic short scale bass. They seem to work fine though the E at .100 is a little smaller than I would like. The Alembic is a .104 if I remember right.

Juststrings.com is the place to compare and buy strings online, super prices.

Dave
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2350
Registered: 6-2002
Posted on Wednesday, March 02, 2011 - 11:40 am:   Edit Post

Yeah I usually get Alembic Strings from JustStrings.com but as I was at this guitar show and they were cheap I decided it was worth a try. Hey ho, at least I know not to buy them again.

Jazzyvee
terryc
Senior Member
Username: terryc

Post Number: 1521
Registered: 11-2004
Posted on Tuesday, March 08, 2011 - 3:26 pm:   Edit Post

jazzyvee..mark king uses that guage and I tried them once too years ago but like you found the sound far too thin..ok if you are slapping all the time as you can really go fast but for playing funk, r'n'b, reggae they are definitely a no go.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration