"all original" series one on EBay... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » Seen on craigslist, eBay, and elsewhere » Archive through September 10, 2012 » "all original" series one on EBay « Previous Next »

Author Message
gtrguy
Senior Member
Username: gtrguy

Post Number: 478
Registered: 9-2004
Posted on Sunday, July 22, 2012 - 10:04 pm:   Edit Post

Am I missing something here or was there a special run of S1 basses in 1978 with funny knobs, big brass neck plates and extra holes in the body?

http://www.ebay.com/itm/1978-Alembic-Series-I-Stanley-Clark-Bass-/120953513943?pt=Guitar&hash=item1c296427d7
garth4664
Intermediate Member
Username: garth4664

Post Number: 156
Registered: 10-2008
Posted on Sunday, July 22, 2012 - 10:13 pm:   Edit Post

Hmm, firstly, it�s a series 2. Also, the pickups can not be from that era. truss rod cover may be original though...
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 1426
Registered: 6-2002
Posted on Monday, July 23, 2012 - 12:14 am:   Edit Post

Is the 'sense spectrum analysis' some sort of reference system I've not heard of?
....Do I need one ? ... or many ??

Elwood

p.s. intresting typo garth -
" it�s "

(Message edited by elwoodblue on July 23, 2012)
dela217
Senior Member
Username: dela217

Post Number: 1115
Registered: 6-2002
Posted on Monday, July 23, 2012 - 3:26 am:   Edit Post

That bass is a Series II. It was mine for a while. I got it from the original owner here in New Orleans.

The LED's in the fingerboard went out, so I sent it back to Alembic. It had some neck issues so they fingerboard had to be replaced anyway. When that was done they fitted a board without LED's. While the bass was there I had them remove the master volume because it was in a very strange spot to me. I kept hitting my hand on it. They replaced the master volume with an inlay.

I ended up parting with this one because the neck was too wide for me. It's a medium scale so maybe that is why the knob placement was off for the master volume. I just was not used to it in that spot.

If I remember correctly, I ended up trading it locally for another medium scale Alembic Series I with a quilted maple top.

Michael
sonicus
Senior Member
Username: sonicus

Post Number: 2567
Registered: 5-2009
Posted on Monday, July 23, 2012 - 4:33 pm:   Edit Post

HI Michael,
How was the balance on this bass with the small standard body and the medium scale neck ?

Wolf
dela217
Senior Member
Username: dela217

Post Number: 1116
Registered: 6-2002
Posted on Monday, July 23, 2012 - 7:08 pm:   Edit Post

Wolf

It was neck heavy for sure. That never bothered me though. I have 2 medium scale small bodied basses now and I don't have a problem with it. It's all in the way I anchor my right arm on the body holding it in place. To each his own I guess.

But I remember why I sent it back to Alembic way back when. When I bought the bass the previous owner overtightened one of the two truss rods. This made the truss rod poke through the back of the neck near the headstock veneers. Alembic gave it their blessing stating it was structurally sound.

I remember the neck being wide at the nut. There was not much taper. It was just about as wide at the nut as it was up the neck at the 12th fret.

Michael
sonicus
Senior Member
Username: sonicus

Post Number: 2569
Registered: 5-2009
Posted on Monday, July 23, 2012 - 7:29 pm:   Edit Post

Michael ,

Thanks for your recollections. I like medium scale as well. When I first saw this Bass on ebay I thought that the neck looked a bit longer then most other small standard body Alembics and in fact it is !

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration