For Sale - SWR Mo' Bass Amp Head with... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » For Sale & Trade » Archive through January 12, 2013 » For Sale - SWR Mo' Bass Amp Head with Foot Switch « Previous Next »

Author Message
emjay
Member
Username: emjay

Post Number: 55
Registered: 3-2005
Posted on Wednesday, October 17, 2012 - 11:21 am:   Edit Post

bypass foot switch, if you can pick it up in Juno Beach FL; otherwise, for $800 I'll FedEx it to you anywhere in CONUS.

Note - this amp is not the Mini-Mo' preamp

Sorry - I don't have actual photos to post and the head is on consignment at a music shop 1/2 hour away, so I can't easily take any; but the description is accurate. For those that don't know what this head looks like though, I'm including a stock SWR photo.

Although this comes with a standard Chinese 12AX7/7025 tube, I have many wonderful fully-tested vintage English, German and Dutch replacement 12AX7/ECC83 NOS tubes for sale from $60 - $160 additional; if you want to upgrade it. There are subtle tonal differences with these tubes in this head, particularly in the details of the built-in effects; and well worth their price IMO.

For those who are unfamiliar with this amp, here's excerpts from SWR's manual, which describes it head very well:

Possibly the only multi-effects unit tailored for bass, incorporating all studio-quality ANALOG modules. The Tube Overdrive is not of this earth. The Octave Effect (he called it a "SubWave") tracks notes in registers so low it seemed impossible. The EQ circuit is a thing of beauty, and the Chorus simply sings. By the time you hear the Synth pumping out sounds straight off of Stevie Wonder's "Songs In The Key Of Life" album, you know you love this head.

Now you can own a single amplifier that can be as simple or complex as you need it to be. Run it totally clean into one speaker cabinet for classic SWR sound. Run it into two cabinets and use the chorus. Split your clean and dirty signals using the Dual Mode feature. Combine effects. Switch back and forth. Experiment to your heart's content. Use it in the studio with everything on at once for sounds never before recorded. Send one signal to a mixing board. Send two. Send three!


• Dual independent input jacks compatible with both passive and active instruments
• Pre-Amp Volume Control with bi-color (green/red) LED peak clipping indicator
• Variable Limiter/Leveler Control with yellow LED indicator
• Aural Enhancer Control
• Treble Level Control
• Midrange Level Control
• Midrange Frequency Control
• Bass Level Control
• Overdrive "Drive" Control
• Overdrive Level Control
• Subwave Tone Control
• Subwave Mix Control
• Bassynth Filter Control
• Bassynth Resonance Control
• Bassynth Envelope Control
• Bassynth Mix Control
• Mo' EQ Treble Control
• Mo' EQ Midrange Control
• Mo' EQ Bass Control
• Chorus Depth Control
• Chorus Rate Control
• Push switches and unique-colored LED indicators for on/off control of all effects
• Internal Effects Bypass Switch with LED indicator
• Left and Right External Effects Blend Controls
• Dual Mode Switch with LED indicator
• Left and Right Master Volume Controls
• Illuminated Neon Power On/Off Switch
• Stereo Headphones Jack
• Screwholes for Rack Mounting (on chassis in each corner)

MO' BASS REAR PANEL FEATURES

• Direct Out 1/4" jack
• Tuner Out 1/4" jack
• Mo' Bass Out 1/4" jack
• Direct Out XLR jack
• Mo' Bass Out XLR jack
• Line/Direct Switch for 1/4" and XLR Direct Out Jacks
• Individual 3-position Pad Switches (0 dB, -10 dB, -20 dB) for both Direct Out and Mo' Bass Out XLR jacks
• Ground/Lift Switch for both Direct Out and Mo' Bass Out XLR jacks
• Stereo Effects Loop (Left and Right Send and Return 1/4" jacks)
• Internal Effects Bypass Footswitch jack
• Filter Sweep Pedal jack
• "Mo' Control" Footswitch jack (shown as "Ft. Sw. In")
• MIDI Out jack
• Stereo/Mono Power Amp Assign Switch
• Two 1/4" and One Speakon Left Speaker Output jacks
• Two 1/4" and One Speakon Right Speaker Output jacks
• One Speakon Bridged/Mono Output jack
• Two Speaker Fuses (3AG, 10 amp fast-blo)
• One Line Fuse (3AG, 10 amp slow-blo)
• AC Power Cord Receptacle

MO' BASS SPECIFICATIONS
Note:
All measurements were taken with a line voltage of 120VAC.
All noise specifications are "unweighted."
All voltages and watts are "RMS."
All measurements taken with tone controls set flat, Aural Enhancer at minimum, all effects disengaged.
Power Ratings (minimum)
Bridge/Mono Mode
900 Watts @ 4 Ohms
650 Watts @ 8 Ohms
440 Watts @ 16 Ohms
(minimum load = 4 Ohms)
Stereo Mode (per side)
600 watts @ 2 Ohms
400 watts @ 4 Ohms
250 watts @ 8 Ohms
150 watts @ 16 Ohms
(minimum load = 2 Ohms)
Frequency Response (Power Amplifier):
-3 dB @ 10Hz to 40kHz
Sensitivity (full output under clipping, 8 ohm load, 100 Hz)
Passive Input Jack: 42 millivolts
Active Input Jack: 84 millivolts
Power Amplifier (Effects Return Jack "in"): 6 volts peak-to-peak
Input Impedance
Passive/Active Input: 1 Meg Ohms
Active Input: 47K Ohms
Effects Returns: 27K Ohms
Output Impedance
Effects Sends: 220 Ohms
Tuner Output: 220 Ohms
XLR Balanced Out: 750 Ohms
Signal To Noise Ratio:
-88 dB (<10 millivolts typical)
Equivalent Input Noise:
15 nanovolts per root/hertz
Dimensions (measured from the rack ears back)
19" W x 5 " H x 13" D (the front panel flanges add 1")
Weight: 29 lbs.
stout71
Member
Username: stout71

Post Number: 88
Registered: 7-2011
Posted on Thursday, October 18, 2012 - 12:49 pm:   Edit Post

I used to own one. The analog effects on this thing sound HUGE.
emjay
Member
Username: emjay

Post Number: 56
Registered: 3-2005
Posted on Saturday, October 20, 2012 - 9:11 am:   Edit Post

10/20/12 - I'm reducing the price to $625 local pickup in Juno Beach FL, or $675 shipped CONUS; if paying by PayPal, MC or Visa. If you want to send a personal check for $650, I'll ship it after your check clears.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration