What is up with this?!

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message edwin Senior Member Username: edwin Post Number: 1438 Registered: 5-2002 Posted on Monday, February 25, 2013 - 11:51 pm:    http://www.ebay.com/itm/ALEMBIC-CUSTOM-MADE-BASS-SERIES-1-NECK-PADUK-CUSTOM-P-BASS-BODY-/261176170210? sjhoffma Advanced Member Username: sjhoffma Post Number: 301 Registered: 5-2008 Posted on Tuesday, February 26, 2013 - 10:05 am:    I was just thinking the same thing. hammer Advanced Member Username: hammer Post Number: 318 Registered: 9-2009 Posted on Tuesday, February 26, 2013 - 10:46 am:    Given that its only the neck the seller is claiming to be Alembic it might more accurately be listed as a Kellembic as opposed to a custom piece from the mothership. gtrguy Senior Member Username: gtrguy Post Number: 587 Registered: 9-2004 Posted on Tuesday, February 26, 2013 - 12:02 pm:    I warned everyone about not letting your Alembics out at night and allowing them to run around the neighborhood with the Fenders. This is what you get!! http://alembic.com/club/messages/394/150745.html?1361578989 I really wonder what the original bass was and what its serial number is, since last time I looked, no one was actually slapping the old Series One down on the bandsaw in order to make a Fender out of it. klinkepeter Intermediate Member Username: klinkepeter Post Number: 104 Registered: 2-2008 Posted on Tuesday, February 26, 2013 - 12:19 pm:    the neck looks like it comes from a series I, pritty sad edwin Senior Member Username: edwin Post Number: 1439 Registered: 5-2002 Posted on Tuesday, February 26, 2013 - 12:26 pm:    My guess is that it's a shop night neck or even a reject that managed to escape. I tried to look at the top of the headstock to see if a serial number had been stamped up there, but it looked blank. I'd pay about $200 for it.