2001 Series II with beautiful burl ro... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » For Sale & Trade » 2001 Series II with beautiful burl rosewood top [SOLD] « Previous Next »

Author Message
s_wood
Senior Member
Username: s_wood

Post Number: 416
Registered: 5-2002
Posted on Sunday, March 13, 2016 - 1:04 pm:   Edit Post

Burl4 front

This is a 2001 Alembic Series II in near mint condition. I just don't play four 4 strings enough these days to justify holding on to it.



This bass deserves to be played! Trust me on this: it sounds even better than it looks!

The burl rosewood top was part of a special batch the Alembic had reserved for their 25th Anniversary basses. It is an exceptionally beautiful tone wood with a tone that, to my ears, is similar to cocobolo.

burl4 close front

The electronics are standard Alembic Series II electronics, with one twist - there is a pan control and a master volume instead of the usual pickup selector and individual volume for each pickup.

The is in near-mint condition. There are no real scratches, dings or damage of any kind. The only thing I can find is a couple of light scratches on the back of the brass control cavity, but they are impossible to photograph.

burl4 back

The mahogany body was chambered to save a little weight, but really mostly for tone purposes. The chambers give the bass a special resonance.

I'm asking $8,500 plus shipping. That's about 1/3 of what this bass would cost if purchased new today. This bass would have a list price of more than $22,000 if ordered today...and I don't know if burl rosewood is even available any more. Please note that the Alembic DS-5 power supply which can be used to power the active electronics is NOT included in this sale. The bass can be powered with 2 9 volt batteries, too. The power supply can be purchased directly from Alembic if you want one.

I will happily consider international sales, but only if the buyer agrees to be responsible for all custom duties, fees, VAT, etc. Sorry, but I won't undervalue the bass for customs purposes or claim it to be a gift, either. That's a crime in the U.S.

Please feel free to contact me if you have any questions!

Please feel free to contact me with any questions that you might have!
moongerm
Advanced Member
Username: moongerm

Post Number: 362
Registered: 8-2013
Posted on Sunday, March 13, 2016 - 1:25 pm:   Edit Post

That is beautiful Steve!
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 4944
Registered: 6-2002
Posted on Sunday, March 13, 2016 - 2:41 pm:   Edit Post

Certainly is and can see from the pickup covers that the bass has hardly seen active duty at all. Looks like a superb bass and someone is gonna really enjoy this one.
pierreyves
Senior Member
Username: pierreyves

Post Number: 1300
Registered: 11-2006
Posted on Sunday, March 13, 2016 - 2:42 pm:   Edit Post

too expensive for an hybrid not back plated ;-)anyway it's a wonderful wood bass !
fc_spoiler
Senior Member
Username: fc_spoiler

Post Number: 1879
Registered: 5-2006
Posted on Sunday, March 13, 2016 - 3:27 pm:   Edit Post

Bass is so stunning I didn't notice that! :-)

Backlams or no back lams... If I would find $8500 + shipping somewhere in my couch, I would have no hesitation at all to spend it on this bass.

Good luck with the sale and wish me good luck gouging out my couch! :-)
pas
Advanced Member
Username: pas

Post Number: 319
Registered: 3-2003
Posted on Sunday, March 13, 2016 - 3:43 pm:   Edit Post

Scale length?
s_wood
Senior Member
Username: s_wood

Post Number: 417
Registered: 5-2002
Posted on Sunday, March 13, 2016 - 4:11 pm:   Edit Post

Scale length is 34". Sorry I omitted that important detail.
pas
Advanced Member
Username: pas

Post Number: 320
Registered: 3-2003
Posted on Monday, March 14, 2016 - 7:38 am:   Edit Post

Whew...that was a close one! If it had been medium scale, I'd already have a check in the mail.
bforbeatles
New
Username: bforbeatles

Post Number: 9
Registered: 4-2012
Posted on Tuesday, March 22, 2016 - 10:11 pm:   Edit Post

Shall we regard it as series l or series ll?
enzo
Senior Member
Username: enzo

Post Number: 568
Registered: 4-2009
Posted on Tuesday, March 22, 2016 - 10:38 pm:   Edit Post

I'd say it's a Series II because of the 2 CVQ (and the 3 center laminations). The fact that it doesn't have a master volume, because of the different config, doesn't make it Series I.
You can put a master volume on a Signature electronic but that doesn't make it a Series.
poor_nigel
Senior Member
Username: poor_nigel

Post Number: 420
Registered: 11-2009
Posted on Wednesday, March 23, 2016 - 12:41 am:   Edit Post

I always wanted an SII with a pan. SII or S1.5, who cares with that top on it. Right now I am too broke and too Alembic enriched to have another. But that top is eating at me . . .
poor_nigel
Senior Member
Username: poor_nigel

Post Number: 421
Registered: 11-2009
Posted on Wednesday, March 23, 2016 - 12:46 am:   Edit Post

I almost bought a 25th anniversary once, but I ended up talking the guy into keeping it. And yes, that top is still eating at me . . .
s_wood
Senior Member
Username: s_wood

Post Number: 419
Registered: 5-2002
Posted on Wednesday, March 23, 2016 - 6:40 am:   Edit Post

It's a Series II. That's what Alembic says it is, and that's good enough for me.

BTW, I ordered the bass without the back lam to keep the weight down. I've done that with most of my custom orders. I saved about a pound by doing so, and some money besides :-)
bforbeatles
New
Username: bforbeatles

Post Number: 10
Registered: 4-2012
Posted on Wednesday, March 23, 2016 - 7:46 am:   Edit Post

Thanks for the infornation steve. Really nice bass indeed.
pierreyves
Senior Member
Username: pierreyves

Post Number: 1302
Registered: 11-2006
Posted on Wednesday, March 23, 2016 - 8:10 am:   Edit Post

my God..... this bass... i love.... yes it's a series II with pan pot and master volumne... I have a SC sries I like that, good idea... less of pots !
s_wood
Senior Member
Username: s_wood

Post Number: 420
Registered: 5-2002
Posted on Thursday, March 24, 2016 - 6:23 am:   Edit Post

Tom, you are correct in that the bass doesn't have a back laminate. While others may disagree, to me it doesn't make sense to spend $1,000 or more for a back laminate that I and others will rarely see, and which adds to the weight of the instrument. Plus, I think the back of the instrument which shows off the neck-through construction has its own beauty. Here's proof:
keith_h
Senior Member
Username: keith_h

Post Number: 2385
Registered: 2-2005
Posted on Thursday, March 24, 2016 - 8:04 am:   Edit Post

I agree about the about showing the through neck. On my Series 1 I went with bookmatched to center front and standard laminates on the back to show the flame maple in the neck.

Keith
edwardofhuncote
Senior Member
Username: edwardofhuncote

Post Number: 897
Registered: 6-2014
Posted on Friday, March 25, 2016 - 6:44 am:   Edit Post

+1 more on the visible neck lams.

I was just showing this thread to my Dad last night, pointing out the three purpleheart stringers of Series II. Those neck laminates are so unmistakably Alembic, that I just couldn't see not showing them off. I think maybe my favorite feature of Rusty's "Blue Orca" Custom is how the neck-thru section of the bass was masked off and remains natural, in contrast to the deep blue quilted maple wings.

I went back and forth on my Custom trying to decide on matching or diverse back laminates, or just skipping them altogether... in the end I went with matching birdseye top and back, but the purpleheart lams will most definitely be seen, coming and going.

Sorry for the derail Steve! Maybe we'll talk you outta' selling this one!
hammer
Senior Member
Username: hammer

Post Number: 865
Registered: 9-2009
Posted on Friday, March 25, 2016 - 10:10 am:   Edit Post

Neck! Give me more neck!

I just can't see covering up both sides of the beautiful multi-lam necks that Alembic makes.
poor_nigel
Senior Member
Username: poor_nigel

Post Number: 423
Registered: 11-2009
Posted on Friday, March 25, 2016 - 12:42 pm:   Edit Post

One of the things that make humans great beings is we be all different. I have a quirk in I MUST have symmetry in things, or it bugs me irrationally. So I have to have back lams. Your logic is flawless. I have rationalized my need for back lams by telling myself the front is for the crowd, but the back is all for myself, and for me it works. I am not much into book-matched-to-center on the backs of instruments (and generally true for front lams, too, with a couple of exceptions of outstanding woods so beautiful - go for it!), as I love seeing the neck lams from start to finish. Another quirk of mine. My first hippie sandwich fetish started with Webber skateboards back in the early sixties, and I have just love laminated woods ever since. So I agree how great Alembic backs are, with or without back lams - But I want it all, dammit.
gregduboc
Senior Member
Username: gregduboc

Post Number: 559
Registered: 11-2008
Posted on Monday, March 28, 2016 - 7:12 pm:   Edit Post

That is one beautiful bass... If only my Brazilian money was not so undervalued right now... :-(

Steve is a great guy to deal with! He was very helpful when he sold me his Series I Europa. First class seller!

Whoever gets this bass, will be one happy fella!
moongerm
Advanced Member
Username: moongerm

Post Number: 371
Registered: 8-2013
Posted on Monday, March 28, 2016 - 8:03 pm:   Edit Post

If only this was 32" or 30.75" I would consider.
poor_nigel
Senior Member
Username: poor_nigel

Post Number: 425
Registered: 11-2009
Posted on Thursday, March 31, 2016 - 1:48 pm:   Edit Post

I will jump in anytime to second on how great it is to buy a bass from Steve. I have dealt with no one of higher integrity and knowledge of low-end instruments. You will get just what he states you will, if not better. I wish you all the best Steve, in all you do.
s_wood
Senior Member
Username: s_wood

Post Number: 421
Registered: 5-2002
Posted on Thursday, March 31, 2016 - 2:10 pm:   Edit Post

Awww... thanks, folks!
ajdover
Senior Member
Username: ajdover

Post Number: 1049
Registered: 11-2003
Posted on Thursday, March 31, 2016 - 2:40 pm:   Edit Post

My Series II Custom has back laminates, but ... The neck laminates are visible. Mine is a replica of John Entwistle's Exploiter basses, so it's a bit different from your traditional Series II. It has a walnut core, and the birdseye maple lams sit on top of that, without covering the neck on the back or front of the instrument. And it has wood backplates, which are a must in my experience.

For me, if it has Series II electronics and other standard elements, it's a Series II. Now, if you're doing a Custom, all bets are off. I don't have one master volume, I have two, with a switch to choose between them (like Entwistle's Alembics). I don't have a pickup selector switch, I have a pan pot (which I find more useful for me than a selector switch), and an on/off switch for the LEDs. I have continuously variable Qs, which I love.

Anyway, this is a beautiful bass, Steve, and best of luck with the sale.
enzo
Senior Member
Username: enzo

Post Number: 572
Registered: 4-2009
Posted on Thursday, March 31, 2016 - 4:54 pm:   Edit Post

If I had the money I would jump on this bass even if Steve had no integrity LOL.
s_wood
Senior Member
Username: s_wood

Post Number: 422
Registered: 5-2002
Posted on Friday, April 01, 2016 - 6:20 am:   Edit Post

And...sold! Thanks!
poor_nigel
Senior Member
Username: poor_nigel

Post Number: 426
Registered: 11-2009
Posted on Saturday, April 02, 2016 - 2:02 pm:   Edit Post

Someone is going to be a happy camper! Fantastic wood!

Alan, the pan for the selector switch sounds great. I wish I had read your post when five-string was in being worked on. It is still something to consider, as I have another bass at the factory being worked on currently. Thank you.
bforbeatles
Junior
Username: bforbeatles

Post Number: 11
Registered: 4-2012
Posted on Friday, April 08, 2016 - 8:46 am:   Edit Post

Yes sir. I am more than happy indeed
bforbeatles
Junior
Username: bforbeatles

Post Number: 12
Registered: 4-2012
Posted on Friday, April 08, 2016 - 8:48 am:   Edit Post

Yes sir. I am more than happy indeed. Steve is such a nice guy.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration