Author |
Message |
csissom
Member Username: csissom
Post Number: 85 Registered: 11-2005
| Posted on Tuesday, May 09, 2006 - 1:15 pm: | |
Not sure I've seen one of these before |
jazzyvee
Senior Member Username: jazzyvee
Post Number: 424 Registered: 6-2002
| Posted on Tuesday, May 09, 2006 - 2:44 pm: | |
Seems dodgy especially as its a bolt on neck. Jazzyvee |
staemius
Member Username: staemius
Post Number: 61 Registered: 12-2004
| Posted on Tuesday, May 09, 2006 - 4:27 pm: | |
Could this have possibly been a neck-thru at some point? - hard to tell. To many things about this one do not add up to be an Alembic - but, if so, I would have loved to have seen this one in original form. |
davehouck
Moderator Username: davehouck
Post Number: 3805 Registered: 5-2002
| Posted on Tuesday, May 09, 2006 - 5:52 pm: | |
Well, it's an Alembic bridge; and they did start making that style in '77. And the tailpiece looks like something Alembic might do on a custom order. My guess would be that if it were made at Alembic, it was made as an employee side project. But that's just a guess. He says he still has the neck; if it's an Alembic, there should be a serial number stamped in the headstock. He says the guitar was made for him, but he doesn't say anything about replacing the original pickups. And the only thing he says about the electronics is that the toggles were removed. His story isn't convincing. |
keith_h
Senior Member Username: keith_h
Post Number: 433 Registered: 2-2005
| Posted on Wednesday, May 10, 2006 - 4:10 am: | |
He does say in his text that the neck was cut off and another one was bolted on. I suspect it was a neck through at one point. It also appears he still has the old cut off neck. In any event it sure looks like it's been abused. Keith |
trekster
Member Username: trekster
Post Number: 92 Registered: 7-2004
| Posted on Wednesday, May 10, 2006 - 5:05 am: | |
no way this was a neck-thru at one point..the way the heel in the back is cut and not carved, the inside of the neck cavity itself..the back of the guitar being a solid piece..this was born as a bolt-on. Alembic employee side-project? maybe. --T |
lbpesq
Senior Member Username: lbpesq
Post Number: 1280 Registered: 7-2004
| Posted on Wednesday, May 10, 2006 - 7:06 am: | |
There also doesn't appear to be a battery compartment, so perhaps this never had Alembic guts in the first place. Bill, tgo |