Author |
Message |
elwoodblue
Advanced Member Username: elwoodblue
Post Number: 202 Registered: 6-2002
| Posted on Sunday, February 24, 2008 - 1:25 pm: | |
This should be here in a week or so... I'm hoping the electronics are solid and stable, if not it'll still be a nice one to play and play. I bet someone here has a guitar with similar 18v guts if I need a little help figuring out what is supposed to be where(notice the aftermarket black tape around the circuit board...hmmm). |
lbpesq
Senior Member Username: lbpesq
Post Number: 2954 Registered: 7-2004
| Posted on Monday, February 25, 2008 - 7:33 am: | |
Elwood: I have an Aria Pro II Rev Sound RS850. There's a pic on a May 19th posting about 3/4 down in this thread. I don't know if this would help, but, if you'd like, I can take a pic of the electronics cavity for you. Bill, tgo |
elwoodblue
Advanced Member Username: elwoodblue
Post Number: 203 Registered: 6-2002
| Posted on Monday, February 25, 2008 - 7:05 pm: | |
thank you Bill,
|
lbpesq
Senior Member Username: lbpesq
Post Number: 2956 Registered: 7-2004
| Posted on Wednesday, February 27, 2008 - 7:24 am: | |
Elwood: I assume that means you want a pic of the cavity? I should be able to get the guitar out, crack 'er open, and post a pic this weekend (if not sooner). Bill, tgo |
elwoodblue
Advanced Member Username: elwoodblue
Post Number: 204 Registered: 6-2002
| Posted on Thursday, February 28, 2008 - 12:02 pm: | |
No Hurry Bill, I apologize for the vagueness... I might not need any pics etc. if everything is stock. I'll post pictures and details here in a few days and see what she needs from there. I imagine those are dimarzio's and I bet they sound great...I've got these velvet hammer's that are itchin to be used( I think they are meant for stereo tho'). I'm guessing the preamp tone shaping 18v stuff must be a bit different from the low impedance alembic electronics ,since the dimarzio's are high impedance . I think I'll put up my T.W. Doyle to offset this purchase, darn G.a.s. 'till soon |