| Author | Message | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 3611 Registered: 7-2004 |
I have a little used Lexicon MX200. I bought it for reverb only and it sat in my rack at the studio for a few months. Used once a week, never gigged. I recently swapped it out for a Demeter Real Reverb - I just like springs and tubes more than the digital stuff and, other than the reverb, I never used anything else on the Lexicon. The MSRP is $299 and the street price is $199 + tax. I'll let it go for $150 + actual shipping costs, which shouldn't be very much as this unit is pretty light. Bill, tgo | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 3661 Registered: 7-2004 |
Price drop to $125 + shipping. Bill, tgo | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 3754 Registered: 7-2004 |
bump. Doesn't anyone need to make some weird noise, or at least some reverb? Bill, tgo | ||
| davehouck
Moderator Username: davehouck Post Number: 7996 Registered: 5-2002 |
Bill; I have a question. On the front, each processor has three knobs; and the knobs have lines on them, presumably to tell where you are. Let's say on processor one we set up a Small Hall Reverb and we set the PreDelay to 50. So, is the line pointing straight up, midpoint, when we set the PreDelay to 50? We'll save that as user program 1. Now we'll set up user program 2, with the only difference being that we've turned the knob for PreDelay on our Small Hall Reverb so that it's set to 100. Now we'll switch back to user program 1. Although the PreDelay is set to 50, I'm assuming the knob is no longer straight up but is somewhere far to the right of straight up. So let's say we want to change the PreDelay to 100 on this program. If the knob is somewhere way to the right of center, and we want to change from 50 to 100, will the knob continue to turn continuously until we reach 100? My questions assume the knobs are not motorized. And my guess is that the knobs do indeed continue to turn either direction so that the full range of 0 to 100 is available. In which case, I don't really see what the lines are for. | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 3778 Registered: 7-2004 |
Dave: Like I said above, I just used it for reverb. I never even read the instructions on how to save user programs, etc. If it goes to 100, I guess that makes it 89 better than any of Spinal Tap's equipment! I am pretty sure the knobs aren't motorized, though. Bill, tgo | ||
| davehouck
Moderator Username: davehouck Post Number: 7997 Registered: 5-2002 |
Just wonderin'. Thanks! |
