70's Hardtruckers cabs / Seattle CL Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » Seen on craigslist, eBay, and elsewhere » Archive through August 17, 2009 » 70's Hardtruckers cabs / Seattle CL « Previous Next »

Author Message
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 751
Registered: 6-2002
Posted on Saturday, July 11, 2009 - 7:21 am:   Edit Post

Wishin' I had some extra funds for these:
linky
sonicus
Intermediate Member
Username: sonicus

Post Number: 173
Registered: 5-2009
Posted on Saturday, July 11, 2009 - 8:00 am:   Edit Post

I have a stack of Pre- Hardtruckers "ALEMBIC" cabs. 4 /15's 1/18
and 2/12 singles I am about to have the JBL D-140's in 3 of the 15's reconed . The 18 has a GAUSS in good shape and the 2/12 singles have GAUSS drivers in good shape. The 2/ 12's singles with GAUSS drivers live hooked up permanently as sub woofers in my BI-AMPED playback system.The 18 inch GAUSS in the ALEMBIC CAB is a TOTAL BEAST weight and sound wise ! it can move enough air to part your hair if you stand in front of it .
jfiles
Junior
Username: jfiles

Post Number: 12
Registered: 2-2006
Posted on Saturday, July 11, 2009 - 9:27 am:   Edit Post

Hey sonicus - can we please, please see some pics?
sonicus
Intermediate Member
Username: sonicus

Post Number: 176
Registered: 5-2009
Posted on Saturday, July 11, 2009 - 9:57 am:   Edit Post

Yes, I will post as soon as I get some cleaning up done in the studio. I had have stuff stacked up all over the place while reorganizing. PIcs with Alembic Bass's and speakers and other swell gear will come soon ____ including vintage recording gear! etc ... ...With in a week. I know it s not fair to tease and not show . I will make good on my promise.
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 754
Registered: 6-2002
Posted on Saturday, July 11, 2009 - 12:21 pm:   Edit Post

Cool !
sonicus
Intermediate Member
Username: sonicus

Post Number: 177
Registered: 5-2009
Posted on Saturday, July 11, 2009 - 2:10 pm:   Edit Post

I have had some of these cabs since the mid 1970.s so some of them show some " ware and tear "from being transported around to gigs so I am going to refurbish the ones needing it the most. There were 2 15 's that I have had the longest that I will sand down and patch a bit with wood bondo and then stain and oil finish. In the end I hope to be able to set up a "BEAST SYSTEM" with;
1 /18 , 2/15's in Alembic cabs and 4 /10 EV/MESA cab powered by my 2 Yamaha p-2200 power amps fed from an ALEMBIC F2B and SF-2 & 2 Furman PQ3's with a Symetrix 525 compressor limiter and perhaps either my DBX 223 active cross over or the Crown VFX2A. Still only approximately 1,000 Watts RMS but they are clean cool unstrained Watts. I don't have my F2B or SF-2 yet but Mica told me that the F2B's will be available soon . I have all the other stuff from other rigs that I have used in the past. It will be fun to experience this rig when all set up . YES _ I am a gear head GEEK ! LOL_LOL_LOL_LOL__ I am making up for having kept it simple for a while. I can RAGE on this rig !!! Just an OLD guy having fun __________again .

(Message edited by sonicus on July 11, 2009)

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration