Fernandes- Alembic Logo Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » Seen on craigslist, eBay, and elsewhere » Archive through October 27, 2009 » Fernandes- Alembic Logo « Previous Next »

Author Message
precarius
Advanced Member
Username: precarius

Post Number: 307
Registered: 11-2005
Posted on Friday, August 21, 2009 - 9:47 am:   Edit Post

http://cgi.ebay.com/Fernandes-FAB-and-FAG-Alembic-clones-Guitar-and-Bass_W0QQitemZ320413453218QQcmdZViewItemQQptZGuitar?hash=item4a9a214ba2&_trksid=p3286.c0.m14
lbpesq
Senior Member
Username: lbpesq

Post Number: 4061
Registered: 7-2004
Posted on Friday, August 21, 2009 - 10:30 am:   Edit Post

I've been watching these. Still a little too soon to jump in.

Bill, tgo
lbpesq
Senior Member
Username: lbpesq

Post Number: 4067
Registered: 7-2004
Posted on Thursday, August 27, 2009 - 12:41 am:   Edit Post

By the way, if I wind up with these, I'll be bringing the bass up to the mothership for a logo-ectomy.

Bill, tgo
dela217
Senior Member
Username: dela217

Post Number: 983
Registered: 6-2002
Posted on Thursday, August 27, 2009 - 7:09 am:   Edit Post

I asked the guy with the auction to send me pics of the inside of the instruments. The guitar is fitted with actual Alembic series 1 electronics!!! Alembic pots, wiring, the works.

Michael
davehouck
Moderator
Username: davehouck

Post Number: 8655
Registered: 5-2002
Posted on Thursday, August 27, 2009 - 2:46 pm:   Edit Post

The bid has really climbed on this in the last few hours.
hankster
Advanced Member
Username: hankster

Post Number: 210
Registered: 6-2004
Posted on Thursday, August 27, 2009 - 7:07 pm:   Edit Post

Not high enough, apparently.

R.
blackcrayon
New
Username: blackcrayon

Post Number: 2
Registered: 9-2008
Posted on Saturday, August 29, 2009 - 7:48 pm:   Edit Post

Based on his concurrent craigslist posting, he wants almost $3000 for the pair. I wonder if he'd have better luck selling them separately...
thedruids
New
Username: thedruids

Post Number: 1
Registered: 9-2009
Posted on Friday, September 04, 2009 - 4:57 am:   Edit Post

I contacted the seller and he agreed to sell me the FAG-170. Should be coming next week. Will require some work ... brass nut has not been set, loose wire that apparently does not effect performance per seller, middle hum canceling pickup was filed down and requires replacement (I have email into Mica for a replacement), plus I will either buy the PS-5 and cable or do the stereo to mono mod on the output. Its all Alembic electronics. Seller's Uncle fabricated the back plate, tailpiece and nut ... nice job, at least from the pics. I was happy to buy this since I lost out on an original Alembic SSG in the 70's for only $2000. I would have bought the Alembic Series I but after the Stanley Clark I just could not swing $16,000. Plus being out of work for 7 years in this land of opportunity has not helped. Thanks for a great post!
Fernandes FAG-170
Fernandes FAG-170 closeup

(Message edited by davehouck on September 04, 2009)
thedruids
New
Username: thedruids

Post Number: 2
Registered: 9-2009
Posted on Friday, September 04, 2009 - 5:28 am:   Edit Post

OK ... here's some more pics ...
Fernandes FAG-170 back
Fernandes FAG-170 Headstock
Fernandes backplate off
Alembic Electronics 1
Alembic Electronics 2

(Message edited by davehouck on September 04, 2009)
thedruids
New
Username: thedruids

Post Number: 3
Registered: 9-2009
Posted on Friday, September 04, 2009 - 8:55 am:   Edit Post

Hi Dave ... thanks for straightening my pictures out! Looks much better ... all the best ... Pete
davehouck
Moderator
Username: davehouck

Post Number: 8694
Registered: 5-2002
Posted on Friday, September 04, 2009 - 3:12 pm:   Edit Post

Thanks Pete; and welcome to the board!
thedruids
New
Username: thedruids

Post Number: 4
Registered: 9-2009
Posted on Saturday, September 12, 2009 - 9:24 am:   Edit Post

Thanks much Dave for the nice invite!

Hopefully I can get some help with these parts I need. I'd like to buy the Alembic middle hum cancelling pickup as on the Series I and SSG since this one was "wasted":

Ruined Middle Hum Cancelling Pickup

I would also like to purchase the Alembic adjustable brass nut for Series I. Will make the job of restoration easier than using this homemade nut that this guitar came with:

Homemade brass nut

Homemade brass nut  2

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration