Vintage 1976 Alembic Series 1 Bass Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Swap Shop and Wish Lists » Seen on craigslist, eBay, and elsewhere » Archive through March 19, 2011 » Vintage 1976 Alembic Series 1 Bass « Previous Next »

Author Message
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2303
Registered: 6-2002
Posted on Tuesday, January 18, 2011 - 1:39 pm:   Edit Post

Series I bass on Ebay

Jazzyvee
rjmsteel
Intermediate Member
Username: rjmsteel

Post Number: 139
Registered: 7-2008
Posted on Tuesday, January 18, 2011 - 3:21 pm:   Edit Post

I played this bass and, at the time, they said one of the pickups wasn`t working. I did not put it through an amp.

I "suggested" they contact the mothership since it was not real clear to me that the guy I spoke to really understood the electronics... I could be wrong.
mike1762
Senior Member
Username: mike1762

Post Number: 740
Registered: 1-2008
Posted on Tuesday, January 18, 2011 - 3:56 pm:   Edit Post

I suspect a PUP "wasn't working" thru the 1/4" out... as would be expected since the jack is stereo. That's a nasty fracture thru the neck.
rjmsteel
Intermediate Member
Username: rjmsteel

Post Number: 140
Registered: 7-2008
Posted on Tuesday, January 18, 2011 - 5:09 pm:   Edit Post

There was no mention of the power supply on premises at the sellers location, nor is it even identified (in any photo or text) in the ebay ad. They said the bass was a trade in or something to that effect, and I suspect they paid out handsomely to the previous owner from the comments the shop made. I am curious as to what kind of return they are thinking to get out of it.

Mike: Agreed on the neck "repair" job: nasty!

Definitely could have been done right in Santa Rosa.

-Rich
pauldo
Senior Member
Username: pauldo

Post Number: 545
Registered: 6-2006
Posted on Tuesday, January 18, 2011 - 8:17 pm:   Edit Post

holy weirdness!
I knew a guy that was selling his 70's something Alembic in Milwaukee at Walker Music, the bass had fallen off a stand and off the stage and the headstock had to be repaired. This was early 80's.
I never looked at the repair job (concur that this one looks like crap) but I recall the guy telling me that it WAS repaired by Alembic. Could this be the same bass? Did it fall and re-open the wound (it is in the same location)and then was repaired by someone less skilled?

Weird Weird Weird

I'm going to bed.
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2304
Registered: 6-2002
Posted on Tuesday, January 18, 2011 - 11:32 pm:   Edit Post

I have noticed a not insignificant number of series basses that have broken in the same area as this one in recent years, here and on ebay. It does raise the question as to whether that type of neck headstock joint is strong/durable enough for this design bass. Maybe it is worth the craftsmen & designers at Alembic taking some time out to review, restructure, redesign this area of the bass to make it more durable.

I understand that the type of joint makes repairs easier so at least that's a good thing in one sense. That said, it's the only style of neck joint that I've seen with problems.

Of course it could also be that some musicians just don't take enough care to ensure their instruments are safe,
Just my open thoughts.
Jazzyvee
glocke
Senior Member
Username: glocke

Post Number: 816
Registered: 9-2002
Posted on Wednesday, January 19, 2011 - 2:56 am:   Edit Post

"Of course it could also be that some musicians just don't take enough care to ensure their instruments are safe"

Just my 2 cents, but I think it is this more than anything, but accidents happen, but Ive seen this happen to non-alembic instruments that use the same or similar neck joint. Thats why I seldom use music stds. Unless my bass is getting played it resides in its case, even at gigs.
mike1762
Senior Member
Username: mike1762

Post Number: 741
Registered: 1-2008
Posted on Wednesday, January 19, 2011 - 3:49 am:   Edit Post

Just my opinion, but I think Alembic necks are "stiffer" than most necks (owing to the multi-laminate design). As such, when they are stressed they don't flex... they snap!!!
rjmsteel
Intermediate Member
Username: rjmsteel

Post Number: 141
Registered: 7-2008
Posted on Wednesday, January 19, 2011 - 6:09 am:   Edit Post

As well know the original point design kept players away from leaning their instruments against an amp or some other resting device.

With that said, and even though any of the body shapes I own are either offset or flat at the bottom, I still bring my case with me, on stage, and place `er in the case between sets or otherwise. I simply don`t trust myself, or others: even in a controlled environment. Of course this practice becomes more challenging when using two Alembic basses on the same stage, when required.

As far as the above Series bass, I`d consider bringing my power supply down to the city, Lincoln Park, to see if one could coax both PUP`s working, but that fracture is just to awful to deal with IMHO.
edwin
Senior Member
Username: edwin

Post Number: 848
Registered: 5-2002
Posted on Wednesday, January 19, 2011 - 3:01 pm:   Edit Post

It's not the only instrument that is famous for breaking right at the headstock joint. 60s Gibsons also have this problem, which they attempted to mitigate with a volute. There are a ton of vintage Gibsons out there with headstock repairs. The Alembic way of doing things at least makes it so that the repair is easily done without the ugliness I've seen on SGs, etc.
hankster
Advanced Member
Username: hankster

Post Number: 252
Registered: 6-2004
Posted on Thursday, January 20, 2011 - 6:40 pm:   Edit Post

My Gib Les Paul bass ('69) took a fall backstage at a concert in Victoria in 1978 or so - headstock didn't snap off, but split right through the A and E tuning peg holes. Borrowed a bass from Oak Bay music (thanks, John) for the show, and got a beautiful repair done - but it remains to this day a rare Gibson "dotless i" Les Paul bass. It was in the case when the tragedy happened - but the case closures weren't closed. Learned my lesson!

Rick
crobbins
Senior Member
Username: crobbins

Post Number: 777
Registered: 6-2004
Posted on Thursday, January 20, 2011 - 7:39 pm:   Edit Post

I saw my friends Les Paul take a fall at a gig in Santa Barbara years ago, and the headstock broke right off. Wow! He got it fixed, and still plays great...
tjglow
New
Username: tjglow

Post Number: 4
Registered: 7-2010
Posted on Saturday, January 22, 2011 - 10:12 am:   Edit Post

The only stand I trust.
K&M 17540.K&M stand
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 2305
Registered: 6-2002
Posted on Sunday, January 23, 2011 - 10:29 am:   Edit Post

I have a couple of those stands which are great as long as the base of the bass/guitar is pretty symetrical. I find that my basses with offset bases they don't sit very confidently upright in a stand like that so in the main, on gigs, my instruments stay in their hard cases until I'm ready to play them. Another thing to remember is, if they are on the stand, remove the cord...!!!

Jazzyvee
crobbins
Senior Member
Username: crobbins

Post Number: 778
Registered: 6-2004
Posted on Monday, January 24, 2011 - 5:34 pm:   Edit Post

Amen.
connor
Member
Username: connor

Post Number: 64
Registered: 9-2009
Posted on Wednesday, February 09, 2011 - 10:00 am:   Edit Post

I bought this bass last week. It came with the whole power supply/cable package. The repair job on the headstock joint doesn't look as bad in person as it did in that photo.

I posted about the bass in the showcase section of the forum:
http://alembic.com/club/messages/411/96388.html

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration