Author |
Message |
lovguitar
New Username: lovguitar
Post Number: 1 Registered: 7-2013
| Posted on Friday, July 12, 2013 - 6:04 pm: | |
Hi -- I am new to the club and found it because I am helping a good friend get his newly purchased Alembic Distillate bass up and properly running. It is a beautiful instrument and he is very excited about having been able to purchase it. I have played and worked on many guitars and basses but never an Alembic. I am very impressed and more than a little puzzled but that's why I'm here and ready to learn. Thanks for the community and for your willingness to welcome newbies and share. Cheers -- Paul Cassone |
that_sustain
Advanced Member Username: that_sustain
Post Number: 211 Registered: 8-2012
| Posted on Friday, July 12, 2013 - 10:54 pm: | |
Greetings and welcome to the Alembic Club. I'm one of the Distillate guys, here. These models, like all Alembics...are easy to work with and set up. There are tips from club members and moderators(some of them work at the "factory") on how to fix dings and dents, and how to do neck adjustments. My advice for the neck work, is to take it slow. There is also advice from A-list professional musicians, on occasion. Wait 'till your friend hears his Distillate thru a direct box at a gig, or recording. Daniel |
lovguitar
New Username: lovguitar
Post Number: 2 Registered: 7-2013
| Posted on Saturday, July 13, 2013 - 8:27 am: | |
Daniel - thanks for your response. Yes, I get the idea about doing neck adjustments slowly. This one needs a bit of relief added -- the neck is too straight. Maybe an eigth of a turn loosening each truss rod to start and then watch it over a few days. I have played it through a GK 400RB and an Epifani bottom and it sounds amazing although the wiring needs some attention - A switch was replaced and perhaps some mods made. Looking forward to getting this in primo shape for my buddy Mike. |
jazzyvee
Senior Member Username: jazzyvee
Post Number: 3524 Registered: 6-2002
| Posted on Saturday, July 13, 2013 - 5:27 pm: | |
Try going through this, it should help. http://alembic.com/club/messages/16271/16318.html?1107545766 Welcome to the club Jazzyvee |
lovguitar
New Username: lovguitar
Post Number: 3 Registered: 7-2013
| Posted on Saturday, July 13, 2013 - 8:15 pm: | |
Thanks jazzyvee! Great stuff! |
lovguitar
New Username: lovguitar
Post Number: 4 Registered: 7-2013
| Posted on Tuesday, July 30, 2013 - 8:22 pm: | |
I've been working on the Distillate bass for my friend Mike. We got the schematics and a new bass boost switch (double pole double throw bass boost switch) which was pre-wired but doesn't match either the schematics or what's inside this bass. Would anyone be kind enough to share either a detailed photo showing the wiring of the treble and bass boost switches or a "layout" drawing? This would be most appreciated!! |
keith_h
Senior Member Username: keith_h
Post Number: 1886 Registered: 2-2005
| Posted on Wednesday, July 31, 2013 - 1:53 pm: | |
Can you provide some close up pics of the control cavity? With these someone here should be able to see what you have and be able to provide more information. Keith |
lovguitar
New Username: lovguitar
Post Number: 8 Registered: 7-2013
| Posted on Thursday, August 01, 2013 - 9:46 pm: | |
Hi Keith -- here are some close up pics. I re-wired this much more neatly than it was originally wired and it works, but I'm not sure that the bass boost switch is working properly. Thank you for your help! Paul [edit for picture alignment] (Message edited by adriaan on August 01, 2013) |