Upgrading Rogue elecs? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Dreaming... for now » Archive through October 06, 2007 » Archive 2005 » Archive through October 12, 2005 » Upgrading Rogue elecs? « Previous Next »

Author Message
zn_bassman
New
Username: zn_bassman

Post Number: 8
Registered: 4-2005
Posted on Thursday, June 16, 2005 - 6:24 am:   Edit Post

Just got a stock '97 Rogue with a Bocate top. I'm considering upgrading the elecs. Mica/Val: can you please answer the following:

1. Price and feasibility of adding a second Q/filter + bass and treble switches, and assigning each set of Q/filter/boosts to a separate p/u.

2. Price and feasibility of adding a second Q/filter, assigning each Q/filter to a separate p/u, and having the boosts affect the combined output.

3. Can either of these be done (wiring + drilling/mounting) by a local shop? I live halfway around the world. If so, what's the price of the hardware and can I get a circuit diagram and instructions for the wiring?
------
jacko
Advanced Member
Username: jacko

Post Number: 227
Registered: 10-2002
Posted on Thursday, June 16, 2005 - 7:46 am:   Edit Post

So much for saving up for that Buzzard! LOL.

graeme ;-)
zn_bassman
New
Username: zn_bassman

Post Number: 9
Registered: 4-2005
Posted on Thursday, June 16, 2005 - 9:49 am:   Edit Post

At this rate, the Buzzard-2 is going to have to wait a couple of years. If I upgrade my Rogue, maybe I'll get rich enough to buy it earlier. ;-)

Plus my dream Alembic - flatsawn Zebrawood Exploiter body, custom Series2/Rogue combo elecs w/ 2 mono outputs, side LEDs, ebony neck lams, 26 frets.

Once I get those 2 basses, I can start thinking about 5-, 6-, and 8-strings. In the meantime, I'll have to try to make do with a modest upgrade to my Rogue. ;-)

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration