Slimming down a Spoiler neck & nut wi... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Dreaming... for now » Slimming down a Spoiler neck & nut width « Previous Next »

Author Message
moongerm
Member
Username: moongerm

Post Number: 70
Registered: 8-2013
Posted on Tuesday, December 23, 2014 - 8:11 pm:   Edit Post

Has anyone here ever heard of or had a 5 string Spoiler from the 80's neck thinned and tappered down? I believe it has a classic 2 to 2.5 inch taper. I would like to get the neck slimmed down to 1.75"ish nut width and have a thinner c shape profile.

Not sure it can be done on these Spoilers with the thick neck & dual truss rods without exposing the truss rods?
davehouck
Moderator
Username: davehouck

Post Number: 11612
Registered: 5-2002
Posted on Thursday, December 25, 2014 - 4:53 pm:   Edit Post

I would imagine that Mica would know if it can be done.
edwardofhuncote
Intermediate Member
Username: edwardofhuncote

Post Number: 147
Registered: 6-2014
Posted on Monday, December 29, 2014 - 5:39 pm:   Edit Post

That's only about an 1/8" off either side at the nut, even less further down. I doubt if exposing the truss rods would be an issue from a width standpoint. The depth of the rods in the Spoiler neck may be another thing. Mica the Wise will know.

Bearing in mind, I wouldn't do it... but speaking purely hypothetically -if someone asked me to do this and I couldn't talk them out of it- in order to do this cleanly/correctly, I would first de-fret the bass, then mark it *carefully* before reaching for a rasp, re-fretting afterward. Also, would need to address the string spacing at the nut, and possibly the bridge.

Or you could just send that big ol' wide-necked beauty to live with me and my 5-string Persuader... DOH!!! =)
moongerm
Member
Username: moongerm

Post Number: 72
Registered: 8-2013
Posted on Tuesday, December 30, 2014 - 7:54 am:   Edit Post

Hi Ed, Yes for sure it would be a bit of labor.
lbpesq
Senior Member
Username: lbpesq

Post Number: 5933
Registered: 7-2004
Posted on Tuesday, December 30, 2014 - 9:27 am:   Edit Post

I had the neck shaved down on my '76 Series 1 guitar. I had it changed from a "D" shape to more of a "C" shape, but I didn't change the width at all. I must admit it was a bit disconcerting to watch Bob clamp down my guitar, face down, and take a plane to the back of the neck. Yikes! Turned out very nicely.

Bill, tgo
moongerm
Intermediate Member
Username: moongerm

Post Number: 124
Registered: 8-2013
Posted on Wednesday, March 04, 2015 - 12:59 pm:   Edit Post

Thanks guys for your feedback! Due to costs and risk it is best to leave well enough alone. The only way to get what I really want is to do another build and sell the Spoiler.

Bill, Yes watching that surgical procedure must have been quite nerve racking.
edwin
Senior Member
Username: edwin

Post Number: 1960
Registered: 5-2002
Posted on Wednesday, March 25, 2015 - 6:02 pm:   Edit Post

How about adding another string?

Just thinking out loud.
moongerm
Intermediate Member
Username: moongerm

Post Number: 147
Registered: 8-2013
Posted on Thursday, March 26, 2015 - 5:12 am:   Edit Post

Good idea as that would eliminate the risk of hitting the truss rod but then I would need to widen the neck at the 24th fret to get the spacing I like. I think slimming the neck down but leaving the nut width as is would be considered as making the most sense risk & investment wise. Shucks, a new satin finish would need to be applied to the neck, so the costs go up just to retain the resale value. The bass may fetch up to 3k without doing anything. Slimming it down wouldn't add to the value I don't think? If the bass had anniversary ot series electronics and a sustain block I would consider investing more into it :-) .

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration