Short scale essence Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Dreaming... for now » Short scale essence « Previous Next »

Author Message
afrobeat_fool
Senior Member
Username: afrobeat_fool

Post Number: 547
Registered: 7-2009
Posted on Tuesday, April 07, 2015 - 9:55 am:   Edit Post

I have been thinking about this for a while. I am selling a few basses to start the process, but here is what I want to do. Short scale Essence with Knobby headstock. Maple neck with 2 purpleheart lams and one ebony. Burl walnut top and back, with alder or birch body. I am trying to balance the weight of the bass by keeping the body made of lighter wood, while getting the resonance of the ebony and p-heart. I really like the anniversary electronics Mica used in my Hyak( I know I need to post pic's)so, I want to use those. And I want to use blue or red LED's.

I am open to thoughts, folks, so let 's hear them.

Nick
flpete1uw
Senior Member
Username: flpete1uw

Post Number: 472
Registered: 11-2011
Posted on Tuesday, April 07, 2015 - 10:07 am:   Edit Post

Hey Nick,
Long time no hear? There is a sweet Essence on The Alembic Instagram https://instagram.com/alembicguitars/ owned by Will Gun that could give you some ideas.
Best of Luck!
Pete
lidon2001
Senior Member
Username: lidon2001

Post Number: 548
Registered: 4-2005
Posted on Tuesday, April 07, 2015 - 11:01 am:   Edit Post

I would suggest having them keep the bridge in the location of a 34" neck, as I did with my 32" amboyna custom. Normally they move the bridge forward to compensate for the difference in length. I can still reach the upper most frets with ease, and I would believe a short scale would have similar easy access.

Plastic or wood backplates. Brass is too heavy, though I would keep a brass truss rod cover vs. a plastic one.

Edit to add: Get Will Gunn's smooth string anchor at the bridge; it should be the standard for the model, IMHO. I want to get one for my bass; mine has sharp corners that I don't like.

T

(Message edited by lidon2001 on April 07, 2015)
mica
Moderator
Username: mica

Post Number: 8488
Registered: 6-2000
Posted on Tuesday, April 07, 2015 - 2:47 pm:   Edit Post

Wood plates weigh the same as plastic, and if you are getting a Burl Walnut back, there won't be much of it left if we don't use the wood plates.

Please no Alder! It is a high killer on our basses, unless you want it to sound like a P bass and most un-Alembic. Only Cherry kills it more (I know this firsthand). A light Mahogany will keep it pretty light weight.

I have been thinking about making the capsule tailpiece standard on the Essence. I really like how it looks on Will's bass:

Will's Capsule Tailpiece

Cramming 20th Anniversary electronics in that bass is going to be the trixy part. If you can live with mono only, and maybe put the pickup selector on the upper horn (or eliminating it) things might only be a little crowded. Also, I might consider eliminating an LED switch and just have them fire up when you plug the bass in. There's really not much real estate on those little guys.

You can also do blue AND red LEDs:
RBLED
You know, if you just can't decide.
afrobeat_fool
Senior Member
Username: afrobeat_fool

Post Number: 548
Registered: 7-2009
Posted on Tuesday, April 07, 2015 - 4:03 pm:   Edit Post

LOL! Mica you are just the BEST! Decisions, decisions....

The continuous back plates are a must. No plastic for me.

T - I love your Amboyna burl. I very much would like to have that wood option, or Camphor burl...but it is mighty expensive.

Mica I too thought about mahogany, but thought it would be getting into the heavy side of things, are there some maple options that would be light and still very present in the mix?

How about a bird tailpiece?

Master volume? I wish now I had one installed in the Hyak. I can live with the mono part.

Is it worth putting in 5 prong?

Hi, Pete! It has been a while. How is that early SI treating you?
briant
Senior Member
Username: briant

Post Number: 692
Registered: 12-2004
Posted on Thursday, April 16, 2015 - 8:33 am:   Edit Post

I don't know how light it is vs. other woods but my custom Essence has an all maple body/top with continuous plates. It cuts through the mix like a razor blade. Hotcha. Overall it weights less than 10 pounds and is dreamy to play all night long.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration