Author |
Message |
David Burgess (dnburgess)
New Username: dnburgess
Post Number: 8 Registered: 1-2003
| Posted on Sunday, February 16, 2003 - 10:59 pm: | |
What options would be available to create a black instrument? e.g. Piano lacquer vs stain, what would be the best wood type, etc. |
Paul Lindemans (palembic)
Advanced Member Username: palembic
Post Number: 261 Registered: 9-2002
| Posted on Monday, February 17, 2003 - 2:14 am: | |
Hi David, take a look at http://www.alembic.com/info/FC_stealth.html What I should call a Black bass. If I remember well the bass-player from Metallica owned a couple of black Alembics too. Paul |
Mica Wickersham (mica)
Moderator Username: mica
Post Number: 695 Registered: 6-2000
| Posted on Monday, February 17, 2003 - 11:54 am: | |
We don't offer any stains - all the colors are in the paint only and can be reversed later (albeit with a full refinish). If you want to see the grain through the paint, the only choice is Flame Maple. We offer a finish called "Almost Black" which is what we made most of Jason in Metallica's basses in. From the audience, it looks black, but if you get up close with good light, you can see the grain of the maple through the color. If you're going for an opaque finish like the Stealth Bass Paul referenced, then you should pick the wood that is best suited for the tone you are looking for or the wood you think you might want to see later if there's any chance you'll not want it black in the future. |
David Burgess (dnburgess)
New Username: dnburgess
Post Number: 9 Registered: 1-2003
| Posted on Monday, February 17, 2003 - 1:48 pm: | |
Thanks Paul & Mica - that gives me plenty of food for thought. |