How's that Q-switch treatin' ya? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Dreaming... for now » Archive through June 16, 2008 » How's that Q-switch treatin' ya? « Previous Next »

Author Message
robinc
New
Username: robinc

Post Number: 7
Registered: 5-2008
Posted on Saturday, May 10, 2008 - 9:18 pm:   Edit Post

I'm wondering how all of you fine Alembic owners feel about the Q-switch with a few positions vs. a continuously variable one. Do you find the former of the two limiting?

How much do you think it would run me to have the mothership install continuously variable switches in place of the other ones? Thanks,
-Robin
rob_the_fiend
Junior
Username: rob_the_fiend

Post Number: 50
Registered: 10-2007
Posted on Sunday, May 11, 2008 - 4:00 am:   Edit Post

From what I understand, they only use the CVQ on series instrument. Maybe You can get them to make one with 1dB steps (0-15dB), total 16 steps.
keurosix
Advanced Member
Username: keurosix

Post Number: 294
Registered: 10-2005
Posted on Sunday, May 11, 2008 - 6:23 am:   Edit Post

Good question!
Robin, what model Alembic bass do you own?
CVQ pot is standard on Series 2. Series 1 has a three position Q switch. Most other models have a two position Q switch (3 position is special order), and some models have a fixed-Q with no switch (ex: Essence). Some models don't have the filter & Q at all. You would have to contact Alembic to see if they can add a CVQ to your specific circuit, and what would be the cost. Space inside the control will also determine if it is possible. I'm not sure if a CVQ can be added to a non-series instrument. I only have experience with switched Q circuits on my basses and the SF2 which has a CVQ (Damping Ratio). I prefer the switches because it limits the possibilities. Sometimes too much control can be hard to manage especially live on stage. However, for studio work I think I can see the advantage of the CVQ for greater flexibility.
Kris
bassman10096
Senior Member
Username: bassman10096

Post Number: 1126
Registered: 7-2003
Posted on Sunday, May 11, 2008 - 4:42 pm:   Edit Post

I found the CVQ hard to take advantage of on my S2 -- too many options to relate to intuitively (Let's face it - with everything else I have to do on stage, I don't have the patience for subtlety.). The two position Q's on my Brown Bass are far more useful because they limit me to a finite range of useful options. Would 3 position switches be better? The jury's still out on that.
robinc
New
Username: robinc

Post Number: 8
Registered: 5-2008
Posted on Sunday, May 11, 2008 - 7:21 pm:   Edit Post

"I found the CVQ hard to take advantage of..."

Yeah, my thoughts exactly. As cool as a CVQ sounds, it seems like it could offer too many choices. I suppose it could be useful in a studio situation, but in that case you would probably have enough time to play with your amp or mess with the boards until you get the sound you want.
adriaan
Senior Member
Username: adriaan

Post Number: 1878
Registered: 6-2002
Posted on Tuesday, May 13, 2008 - 2:30 am:   Edit Post

I had my Spoiler electronics modified a couple of years ago. The major thing for me was to have a blend pot instead of the pickup switch, but I also found the standard 8 dB setting far too harsh. Like Robin, I had the idea of a Q switch with 1 dB steps. Mica confirmed that they could make one, but it would have to go on the waiting list for Ron W's bench time. In the end, I decided on a 0/3/6 dB switch.

To my ears, the difference between the three settings is subtle but definitely noticeable. If I ever order a custom Alembic the Q switches will probably be for 0/3/6/9 dB. And if there's only a 3-position option, then 3/6/9.
davehouck
Moderator
Username: davehouck

Post Number: 6556
Registered: 5-2002
Posted on Tuesday, May 13, 2008 - 12:55 pm:   Edit Post

CVQ is not available for non-series instruments.

In past discussions, some members have suggested that less than a 3db difference in positions is a bit insignificant. I don't have an S2 (yet), so I don't know. On my S1, I use all three positions (0-6-9) and find them very useful. It's all very subjective and probably depends to some degree on your particular instrument and rig and the way you use the tone controls on both.
briant
Intermediate Member
Username: briant

Post Number: 176
Registered: 12-2004
Posted on Tuesday, May 13, 2008 - 6:13 pm:   Edit Post

I have Series electronics in both my Alembics that have 2-position Q switches. I use them a lot and don't find myself wanting more. A CVQ would be a bit overwhelming me thinks - especially when trying to make fast tone changes on stage; which I do quite often.
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 1173
Registered: 6-2002
Posted on Saturday, May 17, 2008 - 12:44 am:   Edit Post

id' be interested in a 3 position q-switch for my SC Deluxe and Europa. I wonder how much they would cost?

Jazzyvee
jorge_s
Intermediate Member
Username: jorge_s

Post Number: 163
Registered: 8-2002
Posted on Thursday, May 22, 2008 - 5:57 am:   Edit Post

I've nicknamed my SII the Kaleidoscope. You never get the same combination twice. It's not that bad actually but on my new guitar I am going with the SI electronics (3 position q switch)to be able to find the sounds quicker.
davehouck
Moderator
Username: davehouck

Post Number: 6593
Registered: 5-2002
Posted on Saturday, May 24, 2008 - 4:51 pm:   Edit Post

Jorge; I would think you could use that beautiful grain as indicators for setting the controls!
terryc
Senior Member
Username: terryc

Post Number: 509
Registered: 11-2004
Posted on Monday, May 26, 2008 - 2:07 pm:   Edit Post

Sometimes less is more, I remember Mark King saying that he justs turns everything to max on his Alembics so subtlety was an issue with him when he used his Series II basses back in the late 80's/early 90's.
I find the 2 position Q switch useful to boost the frequency when the guitarist goes into a solo or to give more 'meat' when playing a song which requires more bass.
The Q switch whether variable or fixed must be the most useful tool on Alembic instruments, one which is not on any other makers instruments.
In a nutshell I couldn't do without it!!!
jorge_s
Intermediate Member
Username: jorge_s

Post Number: 165
Registered: 8-2002
Posted on Wednesday, May 28, 2008 - 6:03 am:   Edit Post

I agree. The Q switch is like a little magic wand. I've seen where Mica stresses that one can hear the effect of the Q more with the initial attack of the note rather that the sustain. To my ears this really makes a difference. When I am in the pocket locked with the drummer just a little movement of the Q is the difference between having that great "piano" Alembic attack and completely getting lost in the mix. Finding the sweet spot can be tough because it changes from gig to gig. Sometimes I think it changes from song to song. When I find it though, that is when I think to myself: Yes! this is why I have an Alembic.
robinc
Junior
Username: robinc

Post Number: 16
Registered: 5-2008
Posted on Friday, May 30, 2008 - 3:08 pm:   Edit Post

so only the SI comes standard with a 3 position Q, correct?
keith_h
Senior Member
Username: keith_h

Post Number: 1020
Registered: 2-2005
Posted on Friday, May 30, 2008 - 3:19 pm:   Edit Post

Yes only the S1 comes standard with 3 position Q-switch. However it can be ordered on any bass with a filter and should be an easy retrofit to an existing bass. You can also get the Q-switch set up with boost levels other than the default 9db.

Keith
robinc
Junior
Username: robinc

Post Number: 18
Registered: 5-2008
Posted on Friday, May 30, 2008 - 3:28 pm:   Edit Post

I believe I read something about that but now I can't quite remember what it said. What would the boosted levels be? And how would that work, is there a boost switch that you can flip?
robinc
Junior
Username: robinc

Post Number: 43
Registered: 5-2008
Posted on Monday, June 09, 2008 - 10:28 pm:   Edit Post

Would anyone be able to post a sound clip of the "wah-wah" sound that is supposed to be doable with a filter and Q? I would be very grateful!
hieronymous
Advanced Member
Username: hieronymous

Post Number: 313
Registered: 1-2005
Posted on Tuesday, June 10, 2008 - 5:06 am:   Edit Post

You can hear it near the end of this clip:

double doubleneck

I had just received the bass when I recorded this track - I don't know what possessed me to do it! It's a Series I (doubleneck) and I probably had the Q switch on +6, though it could have been +9 since I was putting it through its paces.

No "wahwah" on this one, but I was changing the frequency position with each phrase - this one is a Spoiler which only has two positions, and it was definitely on +8:

circumambulate

Hope this helps!
robinc
Junior
Username: robinc

Post Number: 44
Registered: 5-2008
Posted on Tuesday, June 10, 2008 - 9:42 am:   Edit Post

Very nice! Is that all you? I dig the track, but I'm not sure I heard the wah-wah. I'm listening for an effect like a "wah-wah" peddle in reggae guitar, but that might not be what it sounds like... I'll have give that some more listening time.

the changes in tone are very distinguishable in the second track, though. I can't wait till I have one of my own to play with!!!!

thanks for the tracks, Harry.
tbrannon
Senior Member
Username: tbrannon

Post Number: 768
Registered: 11-2004
Posted on Tuesday, June 10, 2008 - 10:46 am:   Edit Post

Robin,

I'll go home and quickly record the wah-wah effect + a few basic turns of the filter for you and send it via email as an MP3 if you'd like... is the email in your profile current?

Toby
robinc
Junior
Username: robinc

Post Number: 45
Registered: 5-2008
Posted on Tuesday, June 10, 2008 - 12:32 pm:   Edit Post

The email is good. Many thanks, Toby!
tbrannon
Senior Member
Username: tbrannon

Post Number: 772
Registered: 11-2004
Posted on Tuesday, June 10, 2008 - 2:04 pm:   Edit Post

No problem Robin,

I'll get that email off to you sometime late this evening.
robinc
Junior
Username: robinc

Post Number: 46
Registered: 5-2008
Posted on Tuesday, June 10, 2008 - 2:36 pm:   Edit Post

Awesome. Much appreciated.
robinc
Junior
Username: robinc

Post Number: 47
Registered: 5-2008
Posted on Tuesday, June 10, 2008 - 6:54 pm:   Edit Post

Toby, the clips were extremely helpful. Thanks again! :-)
tbrannon
Senior Member
Username: tbrannon

Post Number: 773
Registered: 11-2004
Posted on Tuesday, June 10, 2008 - 8:17 pm:   Edit Post

No problem Robin!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration