Author |
Message |
briant
Advanced Member Username: briant
Post Number: 207 Registered: 12-2004
| Posted on Saturday, July 12, 2008 - 11:13 pm: | |
I know I should just be calling the Mothership about this but I'm hoping to get an early answer from all you people who know. I have a Q4 and I'm wanting to replace the pickups and electronics with something like the Signature electronics. So how accurate are my thoughts here? I want the full-on Signature electronics sound all the time on this bass. I don't care about having filters with this bass. I am thinking the Signature sound with no filters but add a bass and treble control. Will that work? Does the Signature electronics with no filter controls still sound basically like the Signature electronics with a filter cranked all the way to full? And how close are the pickups to the EMG HZ humbuckers? How much will I have to route out? Inquiring minds want to know. |
davehouck
Moderator Username: davehouck
Post Number: 6790 Registered: 5-2002
| Posted on Sunday, July 13, 2008 - 4:46 pm: | |
I'm guessing here, but I think an AE-3 set of Activators will do what you are wanting. Pickup sizes are here. |
tbrannon
Senior Member Username: tbrannon
Post Number: 822 Registered: 11-2004
| Posted on Sunday, July 13, 2008 - 9:03 pm: | |
I'm pretty sure that Kris (Keurosix) has an Activator equipped Modulus.... |
adriaan
Senior Member Username: adriaan
Post Number: 1915 Registered: 6-2002
| Posted on Monday, July 14, 2008 - 10:26 pm: | |
The filter adds a little resonance peak at the cut-off point (3500Hz?) even before the Q boost. Without the filter, you don't have that specific peak. Not sure if you would completely miss having it. |
davehouck
Moderator Username: davehouck
Post Number: 6799 Registered: 5-2002
| Posted on Tuesday, July 15, 2008 - 5:58 pm: | |
I didn't think about that Adriaan, but I think you're right; I do seem to recall reading that it's the filter circuitry that does produce a slight peak at the cutoff point even without the boost. So there would be a difference in tone with no filter circuit. Wide open would be 6000Hz. So the difference in the lack of that peak would be noticed at the high end. |
keurosix
Advanced Member Username: keurosix
Post Number: 346 Registered: 10-2005
| Posted on Wednesday, July 23, 2008 - 9:29 pm: | |
Toby is correct, however, my Modulus has an unconventional setup: 3 pickups with 3 on/off switches, a vol and a filter with a 2 position Q switch. I believe it is one of my best sounding basses! Here she is 3rd from left: Here's a solo shot: I would think a "Signature setup" without filters would not be a "Signature setup". The filters are what makes the classic sound, even for the series circuits, which the signature design is following. However, adding Q switches will require drilling, and a finsih touchup or total refinish. Something to consider. I did not want to commit to that with mine, so I opted for a simple circuit to occupy all the original holes that came with my Modulus TBX Quantum 5. Kris |