Author |
Message |
sig
New Username: sig
Post Number: 1 Registered: 1-2005
| Posted on Sunday, January 16, 2005 - 4:40 am: | |
I was surprised to find one of these here in Norway. Compared to the default specs on the alembic site, it seems to be quite a one-off, with its figured mahogany top, 2-piece ash body (opposed to the default 3-piece) and a satin finish. BTW, the serial number is 00X12285 USA. |
palembic
Senior Member Username: palembic
Post Number: 1885 Registered: 9-2002
| Posted on Sunday, January 16, 2005 - 5:18 am: | |
Welcome Håkon, nice bass. I love the match between the fingerboard and the top of the body. It cannot be that also the fingerboard is mahogany?? Now THAT would be unusual. Paul the bad one |
sig
New Username: sig
Post Number: 2 Registered: 1-2005
| Posted on Sunday, January 16, 2005 - 6:14 am: | |
Thanks. I have played some other Excels and the fingerboard was was very similar both in colour and texture. Mine had a much nicer grain-pattern, though. A mahogany fretboard would sure be unusual, but I don't know what practical advantages it would offer. BTW, it's strung with Thomastik Infeld Jazz Flats and tuned E A D G C (tenor?). |
davehouck
Senior Member Username: davehouck
Post Number: 1237 Registered: 5-2002
| Posted on Sunday, January 16, 2005 - 7:49 am: | |
Sig; I did not know that you could get a five string E to C set. Did you buy a six string set and use just the higher five strings? Paul; that is indeed an unusual and nice looking fretboard. Since Sig says he's played other Excels with similar boards, it's probably Pau Ferro; though it looks too reddish in the picutres for Pau Ferro. It could be Coco Bolo. I'm thinking it looks like Vermilion, but I haven't heard of that being used as a fretboard wood. (Message edited by davehouck on January 16, 2005) |
rami
Senior Member Username: rami
Post Number: 447 Registered: 6-2002
| Posted on Sunday, January 16, 2005 - 8:12 am: | |
That's a really cool Excel! Unusual pickup placement, but I've seen it before on fretless Excels. I believe the standard finish is still the Satin. I also believe that fingerboard is Pau Ferro. I think it's the lighting in the picture giving it that slightly red-ish appearance. It's a real beauty. Congrats, Rami |
alemboid
Intermediate Member Username: alemboid
Post Number: 120 Registered: 5-2003
| Posted on Sunday, January 16, 2005 - 8:59 am: | |
Beautiful!!!!!!!! How does it sound with the pickup placed so far back? What would you liken the tone to? Alemboid |
sig
New Username: sig
Post Number: 3 Registered: 1-2005
| Posted on Sunday, January 16, 2005 - 1:03 pm: | |
Thanks for your replies! "I did not know that you could get a five string E to C set. Did you buy a six string set and use just the higher five strings?" Yes. Thomastic Infelds are not commonly available over here, so I ordered them from bassemporium.com. Regarding the pickup, I really like the sound I get out of it. Compared to the other Excels, this one was growlier and punchier. When I first saw it, I expected that it would sound somewhat thin and harsh, but that wasn't the case at all. As a fretless, it also seems to have more "mwaah" than others. |
sig
New Username: sig
Post Number: 4 Registered: 1-2005
| Posted on Tuesday, January 18, 2005 - 7:01 am: | |
By the way, "sig" isn't a real norwegian name, but a nickname I acquired after smoking some cigars with some friends (cigar = sigar in norwegian). |
mica
Moderator Username: mica
Post Number: 2214 Registered: 6-2000
| Posted on Tuesday, January 18, 2005 - 10:08 am: | |
I suspected this wasn't a Mahogany top (I dont remember us making one), so I checked the file for this bass. It is in fact Walnut. The picture of the peghead looks fairly typical of Walnut, but the body is a special piece. It's called "feather flame" figure, and it's from the crotch of the tree (where the stem starts to branch out). There's a small amount of this special figure between the truss rod cover and the pickup. The Pau Ferro and the set neck joint really emphazises the "mwah" sound. You can get this from Ebony fingerboard/neck through Alembics too, but it takes a lot more technique and practice, on this one, it's automatic. |
sig
New Username: sig
Post Number: 5 Registered: 1-2005
| Posted on Thursday, January 20, 2005 - 6:00 am: | |
Really? Thanks for letting me know! |
sig
New Username: sig
Post Number: 6 Registered: 1-2005
| Posted on Thursday, January 20, 2005 - 10:34 am: | |
By the way, do you know what year it was made in? |
sig
New Username: sig
Post Number: 7 Registered: 1-2005
| Posted on Thursday, January 20, 2005 - 10:36 am: | |
BTW, do you know what year it was made in? (possibly a bit silly question) |
hollis
Senior Member Username: hollis
Post Number: 601 Registered: 11-2003
| Posted on Thursday, January 20, 2005 - 10:45 am: | |
The first two serial #'s are the ticket. It was born in the year 2000. BTW, Welcome to the group! |
1stbass
Member Username: 1stbass
Post Number: 71 Registered: 11-2002
| Posted on Friday, January 21, 2005 - 4:05 am: | |
Sig, That is a sweet bass. I don't know if it is the lighting, but i love the way the top and the finger board are about the same color. very smart looking. The Excel body is growing on me more and more. LOL Doug |