| Author | Message | ||
| amedine
New Username: amedine Post Number: 7 Registered: 12-2006 |
New owner. This is my first Alembic (74-124). Information from Mica on Serial Number thread: There's not many details on the early instrument records. Here's the little that I can tell you: top: Koa back: Walnut body: Birch neck: Maple and Walnut scale: 34" long fingerboard: Ebony, fretless electronics: PF-6 (don't know if it's Series I or II) originally made for L.D. Heater Music, OR birthday: November 15, 1974 The serial number is usually on the tippy-top of the peghead like you noted. I am looking for guidance. I am uploading some photos of the electronics, cavity and bass. Is this a Series I or II? Any ideas on the sticker with 10/1/74 inside? Herbert Clarke Bell is written on a sticker inside the cavity and dated 10/1/74. Can you or anyone else help with the controls on the bass and the box! Plays and sounds great although I'm not sure yet if everything is working as intended since I am new to Alembics. Thanks for any information. Allen      (Message edited by davehouck on January 13, 2007) | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 2016 Registered: 7-2004 |
Allen: WOW!!!! Beautiful old bass. It's definitely a Series I. The Series II has rotary pots instead of toggles switches for the "Q" function. I LOVE the brass work on the back. These old ones just ooze history, don't they? I have a '76 Series I guitar, #476, but no fancy brass like your's. Enjoy and welcome to the club. Bill, the guitar one | ||
| davehouck
Moderator Username: davehouck Post Number: 4703 Registered: 5-2002 |
Hi Allen; a description of the controls can be found here. | ||
| hifiguy
Member Username: hifiguy Post Number: 66 Registered: 10-2006 |
That is one incredibly cool bass, Allen. | ||
| davehouck
Moderator Username: davehouck Post Number: 4704 Registered: 5-2002 |
As for the "box", I've never seen one like this one before. The DS-5's are a bit simpler. Basically, the five-pin from the bass plugs in to the bottom left 5-pin connector as in the picture. If your amp is a single channel amp, run a regular quarter inch instrument cable from the middle quarter inch jack to your amp. If you have a two channel amp, you can run cables from both the middle and right hand jacks to the two channels of your amp (as in the picture). The middle jack, marked "bass", is from the neck pickup and the right hand jack, "treble", is from the bridge pickup. The two three pin connectors on the bottom are the same as the two quarter inch connectors above except they are low impedence. I can't make out the rest of the instructions, so I'm not sure what the left hand quarter inch jack is; I'm guessing it's a stereo jack, though I'm not sure if it's input or output. The switch on the top right is probably a stereo/mono switch; but again I can't make out the instructions. | ||
| amedine
New Username: amedine Post Number: 8 Registered: 12-2006 |
Dave and Bill, Thanks for the Series I ID...and the operation of the controls. These comments helped in understanding how this beauty functions. A close-up of the power supply is attached. Is this an Alembic product? Does Alembic sell new DS-5s? I think I understand that the bass can operate on a 5-pin with the power supply or by 2-9volt batteries and a stereo 1/4-inch output. Is this correct or am I missing something? Thanks again for any information. Paul...Thanks for the kind words. Allen  | ||
| tbrannon
Advanced Member Username: tbrannon Post Number: 293 Registered: 11-2004 |
Allen, I can't add anything in regards to helping figure out the function of everything, but I can certainly say that you have an absolutely killer bass there. Enjoy it~ | ||
| southpaw
Intermediate Member Username: southpaw Post Number: 122 Registered: 12-2004 |
This raises a question: When did Series II basses begin using rotary Q pots? Like lbpesq, I look for the switch or rotary pot to tell the difference but I found a couple of early examples in the Showcase Series II area that have Q switches, i.e. "78 Seriess II" & "Series II graphite". Since this is a '74 bass there is a chance it is a Series II. It appears the late 70's is the transition period. Beautiful bass Allen, congrats on it! Dave, Mica Or Val? http://alembic.com/club/messages/411/25787.html?1146993313 | ||
| kungfusheriff
Senior Member Username: kungfusheriff Post Number: 582 Registered: 8-2003 |
+1 on the WOW...I remember drooling over your bass when it popped up on eBay a while back. Congratulations, and welcome to the family! | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 2019 Registered: 7-2004 |
Paul: Other than some construction/cosmetic differences, I believe the only electronic difference between Seies I and II is the rotary vs. toggle Q switchs. As for the two examples you gave, if you read down through the "'78 Series II" thread you'll see the discussion that it is really a Series I. As for the "Series II Graphite" thread, there is only one post - the poster who describes it as a Series II. I believe this is also in error. Toggles = I, rotary = II. Bill, tgo | ||
| davehouck
Moderator Username: davehouck Post Number: 4707 Registered: 5-2002 |
Allen wrote, "I understand that the bass can operate on a 5-pin with the power supply or by 2-9volt batteries and a stereo 1/4-inch output. Is this correct?" Yes, however: 1 - Most people use the 5-pin because the series electronics use up batteries very quickly. 2 - As I understand it, and if I'm remembering this correctly, on older basses like this one regular size 9-volt batteries don't quite fit; the original batteries used back then were a little smaller. | ||
| davehouck
Moderator Username: davehouck Post Number: 4708 Registered: 5-2002 |
With the enlarged picture, I can read the label clearly now, but I still don't know what it all means. The switch on the upper right appears to be a selector for high or low impedance. You might want to email this picture to Mica and see if she can get an explanation from Ron. Also, if Michael happens to read this thread, he may have some ideas as this box appears somewhat similar in function to the IN-2 with which Michael is familiar. And yes, I think it is indeed an Alembic power supply, but a very early and/or custom version. The current version of the power supply is the DS-5R, a rackmount version of the DS-5. | ||
| kungfusheriff
Senior Member Username: kungfusheriff Post Number: 584 Registered: 8-2003 |
Bill TGO and Dave are both correct, from what I remember, but I'm also curious about the typewritten and unique instructions...what appears to be a one-off bass popped up a while back with unique electronics and, most uncharacteristically, exposed polepieces, so this one isn't as odd as it might seem. I'd love to get a few hours of play time with it, though. The hand-painted touches hiding inside the bass are really exciting and I'd love to hear what it sounds like. Quick, everybody, take apart and photograph your old Alembics! | ||
| southpaw
Intermediate Member Username: southpaw Post Number: 124 Registered: 12-2004 |
Thanks Bill, Lord knows it's hard enough to keep all the details in order on Alembics without worrying about switches vs. knobs on the Series basses. I was hoping those 2 basses were in the wrong area, all is right again... Thanks again Bill. Paul | ||
| keavin
Senior Member Username: keavin Post Number: 1017 Registered: 12-2002 |
I know my bass is seriesI W/seriesII guts, but i always thought alembic had the electronics options in the early days but decided to add the series II model & gave it a little more features than the seriesI thus creating two standard custom models to choose from..............I Love those "Carmel Candy" pickups! (Message edited by keavin on January 15, 2007) | ||
| u14steelgtr
Junior Username: u14steelgtr Post Number: 42 Registered: 7-2003 |
Does the location of the strap button on the back make it a little neck-heavy? -- Eugene | ||
| amedine
New Username: amedine Post Number: 9 Registered: 12-2006 |
Eugene...The location of the strap button is not the original place and it is, indeed, neck heavy. I am moving it to the original location but first have to remove a 1/8 inch diameter brass insert that filled the screw hole, very nicely I might add.  Dave, I will follow up with Mica on the Power Supply. It may have been used to feed alternate amps/preamps depending on the gig. The electronics are excellent with batteries and separate neck and bridge pickup outputs to my SWR amps (dual SM-400S). I haven't mastered the controls on the power supply and am not getting great signals from the neck pickup at present. Allen | ||
| funkyjazzjunky
Senior Member Username: funkyjazzjunky Post Number: 604 Registered: 5-2007 |
What a beautiful bass | ||
| mario_farufyno
Senior Member Username: mario_farufyno Post Number: 460 Registered: 9-2008 |
Incredible those engraving on brass, beautifull! | ||
| sonicus
Senior Member Username: sonicus Post Number: 1709 Registered: 5-2009 |
Beyond words_____There is some magic here ! | ||
| darkstar01
Advanced Member Username: darkstar01 Post Number: 324 Registered: 6-2005 |
wow. why is it that right when i finish paying for my new upright all these amazing series basses pop up? edit: oops, nevermind. this is from like a year ago... still. very, very nice. (Message edited by darkstar01 on March 17, 2011) | ||
| pauldo
Senior Member Username: pauldo Post Number: 591 Registered: 6-2006 |
year ago or not - holy crap! True piece of art - wow! wow! WOW! | ||
| bigredbass
Senior Member Username: bigredbass Post Number: 1639 Registered: 9-2002 |
What a find, one of the ancient masters. Present right after the creation. Very nice. Now, as if the typewritten hieroglyphics weren't confusing enough . . . . what the hell is a 'piolet'? ? ? ? J o e y | ||
| adriaan
Moderator Username: adriaan Post Number: 2769 Registered: 6-2002 |
Looking at the front of the box, "piolet" must be hip for pilot light. Also digging the "sterio" spelling, btw. | ||
| poor_nigel
Intermediate Member Username: poor_nigel Post Number: 129 Registered: 11-2009 |
I remember this bass well. I do not know if you are looking for old information posted about this bass here in the past, if so, here are some links: http://alembic.com/club/messages/395/13569.html http://alembic.com/club/messages/395/33812.html |
