Post Number: 1568
|Posted on Friday, May 13, 2011 - 9:22 am: |
Our powered monitor is blowing the internal fuse when we switch it on..everytime.
The power supply(or smoothing capacitors)
The amp module
Methinks it is the PS but I could be wrong..I haven't checked the transformer yet with a meter but your suggestions would be very useful
I await your response..thank you gents
We have a spare so gigs are no problem
Post Number: 929
|Posted on Friday, May 13, 2011 - 9:46 am: |
Something like this is very difficult to diagnose over a long distance. It could be any number of things, I'd get it to a tech who can get his hands on it and see what's really going on.
Post Number: 1569
|Posted on Saturday, May 14, 2011 - 6:06 am: |
edwin...I am the part time tech!!!! If I cannot find out what is wrong I know somebody who can!
Thanks for suggeston
Post Number: 716
|Posted on Saturday, May 14, 2011 - 4:22 pm: |
Terry, check the bridge diodes in the power supply section. A simple continuity test w/ your meter should tell you if they fried.... From my experience they're usually the culprit.
Post Number: 1570
|Posted on Sunday, May 15, 2011 - 5:27 am: |
pace..will do..pulling the amp section today whilst I have some time