Anyone know the dimensions of the old... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Miscellaneous » Archive through September 22, 2013 » Anyone know the dimensions of the old Alembic 12" cabinets? « Previous Next »

Author Message
edwin
Senior Member
Username: edwin

Post Number: 1613
Registered: 5-2002
Posted on Saturday, August 24, 2013 - 11:04 pm:   Edit Post

Hi all! I've been revamping my rig, going backwards, if you will. Currently, it's a Showman into a Sunn 200S and I've added a Bandmaster to two K120s in Thiele cabs for the treble pickups when running in stereo. However, I've had this ancient Bag End double 12 cab sitting in my basement for decades and it occurs to me that it might a good cab for the treble pickup. the internal volume for each 12 seems to be 14"x18"x20".

So, I'm curious what the old Alembic/Hard Trucker cabs might have been.

Here's what it looks like right now:

sonicus
Senior Member
Username: sonicus

Post Number: 3007
Registered: 5-2009
Posted on Saturday, August 24, 2013 - 11:43 pm:   Edit Post

Hey there Edwin ,
Well you are in luck with your request for these cabinet dimensions ! I have Both Single and Double cabs here to measure ! The Double is an original GD Wall of sound cab as I have been told . I have 2 singles that have lived in my one of my stereo systems for 2 decades (loaded with Gauss 2840's) . Singles are 20" deep 22 1/2 " Tall & 18"wide

The double twelve is 24" deep 28" tall 19"wide (loaded with JBL k120's) , It is a beast !
and the Single 18 ( loaded with Gauss 4880) (It can part hair @ 10 feet ) is even more of a beast !!!!! LOL ____
edwin
Senior Member
Username: edwin

Post Number: 1614
Registered: 5-2002
Posted on Sunday, August 25, 2013 - 2:57 pm:   Edit Post

Thanks! How does the double twelve sound for bass? Yours sounds similar to mine.

I've got to figure out if I can actually get the thing in my car! The two Joe's cabs are pretty ergonomic.
sonicus
Senior Member
Username: sonicus

Post Number: 3008
Registered: 5-2009
Posted on Sunday, August 25, 2013 - 5:24 pm:   Edit Post

(Double post ghost)

(Message edited by sonicus on August 25, 2013)
sonicus
Senior Member
Username: sonicus

Post Number: 3009
Registered: 5-2009
Posted on Sunday, August 25, 2013 - 5:24 pm:   Edit Post

HI Edwin,
When I first received this Double 12, I tested it with a Series I in mono mode with both bridge and neck pickups next I tested it with just the bridge pickup. In my opinion if you do not push the SPL and transients peaks it is suitable for stereo playing with a Series instrument. Nice definition in the higher spectrum and nice lower and upper midrange character (growl) . But I would be very cautious about pushing the lows. It sounds really nice with guitar full range . The 2 k140's in mine are 8 ohms each , I have them wired parallel to make a 4 ohm load.
peoplechipper
Advanced Member
Username: peoplechipper

Post Number: 362
Registered: 2-2009
Posted on Monday, August 26, 2013 - 10:39 pm:   Edit Post

That is such a cool old school rig! way cooler than my Acoustic 370/Gallien-Krueger/Verlage stack(60's-70's-80's) rig...nice job! probably sounds warm as a wood stove...
Tony

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration