Rogue electronics problem Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Miscellaneous » Archive: 2005 » Archive through June 03, 2005 » Rogue electronics problem « Previous Next »

Author Message
musikdept
Junior
Username: musikdept

Post Number: 23
Registered: 11-2004
Posted on Sunday, May 15, 2005 - 5:52 pm:   Edit Post

I have a 1998 Custom Rogue with, what I've been told are Epic/Europa electronics package. Everytime I play at one particular place on the east Coast, I pick up a local radio station. I thought it might be the UHF wireless transmitter and plug in direct...with the same problem. I switch to my G&L and have no "interference". So I thought I'd turn to the club and seek any suggestions or solutions.
Thanks,
Wayne
dadabass2001
Advanced Member
Username: dadabass2001

Post Number: 373
Registered: 6-2002
Posted on Monday, May 16, 2005 - 5:44 am:   Edit Post

Hi Wayne,
Open your control cavity and check for the ferrite bead (a grey cylinder that the pickup wires pass through before connecting to the preamp board). The bead is available from Alembic if you don't have one, and will cut RFI significantly.
Mike
musikdept
Junior
Username: musikdept

Post Number: 24
Registered: 11-2004
Posted on Monday, May 16, 2005 - 1:29 pm:   Edit Post

Thanks alot...I really appreciate your feedback
--Wayne

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration