Author |
Message |
jazzyvee
Senior Member Username: jazzyvee
Post Number: 4064 Registered: 6-2002
| Posted on Sunday, June 15, 2014 - 1:30 pm: | |
Alembic is also mentioned there regarding state variable filters. http://buildyourguitar.com/resources/lemme/ When I was at the alembic meet two years ago I had a chat with Ron about the pickups and filters some of what he was telling me is covered here. Jazzyvee |
bigredbass
Senior Member Username: bigredbass
Post Number: 2184 Registered: 9-2002
| Posted on Sunday, June 15, 2014 - 3:06 pm: | |
Thanks JV, this is another one that went in the 'Favorites' tab. I understood that pickups aren't microphones, but I could never get an explanation of the resonant frequency I could wrap my head around. Now I get it. J o e y |
5a_quilt_top
Advanced Member Username: 5a_quilt_top
Post Number: 309 Registered: 6-2012
| Posted on Monday, June 16, 2014 - 12:52 pm: | |
"And the best pickup is useless when you have a poor guitar body with poor strings. The basic rule is always: garbage in - garbage out!" This has been my mantra for years. Along these lines - I have a pretty crappy singing voice and putting a great mic in front of me does not make me sound like Freddy Mercury, Paul Rogers, etc. It only precisely magnifies the inherent crappy qualities of my voice. Although pickups aren't microphones, they do transmit the "voice" of an instrument to the amplifier. If that voice is sub par to begin with, the pickup can't salvage it. |
bigredbass
Senior Member Username: bigredbass
Post Number: 2187 Registered: 9-2002
| Posted on Monday, June 16, 2014 - 10:13 pm: | |
I disagree a little: If the guitar / bass is mechanically sound (solid bridge, keys OK, holds tune, manageable / properly adjustable neck / fingerboard), I've seen dropping EMG's into Squier basses made out of really bargain-basement woods wake right up and and do just fine. Conversely, I think I could take an Alembic and put lo-fi passive pickups in it and lose a LOT, even though the entire instrument is world class. Maybe take the P/J set from the Squier, remove the Sig circuit from my Elan, and re-wire my green gem with those pickups and passive pots . . . . shheeeesssshhhh ! For me, 'it's the pickups, stupid', and as long as I've got a mechanically sound axe around them, I've got something to work with. I've long held this same mantra: If it's not electronically quiet, if it won't tune up / stay in tune / play in tune, and the neck / fingerboard can't be consistently held in adjustment, What's The Point? Life is Too Short to Fight a Bass (or guitar) just to play it. J o e y |
lbpesq
Senior Member Username: lbpesq
Post Number: 5771 Registered: 7-2004
| Posted on Tuesday, June 17, 2014 - 9:58 am: | |
Whenever I check out a new (for me) guitar, I always play it unplugged first. If it plays well and sounds good unplugged, you can always mess with the pickups/electronics to make it sound good plugged in. If it doesn't sound good unplugged, no matter what you do to it electronically, it will never be a great guitar - at least that has been my experience. But regardless of pickups vs. construction arguments, IMHO at least 80% of the sound comes from the fingers. Bill, tgo |
jazzyvee
Senior Member Username: jazzyvee
Post Number: 4077 Registered: 6-2002
| Posted on Saturday, June 21, 2014 - 9:50 am: | |
Some other good reference material on guitars & basses. http://www.frudua.com/guitar_craftpedia_en.html Jazzyvee |
peoplechipper
Senior Member Username: peoplechipper
Post Number: 434 Registered: 2-2009
| Posted on Monday, June 23, 2014 - 11:15 pm: | |
Bill, you are right; try it unplugged first...if it sounds good that way, you can always improve the pickups but you can't improve the wood...Tony...I have actually bought guitars and basses without plugging them in because they sounded right acoustically... |
|