Truss rod wrench

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message harald_rost Intermediate Member Username: harald_rost Post Number: 102 Registered: 6-2002 Posted on Thursday, October 20, 2005 - 3:26 am:    I still can't believe it but I'm not able to get a 1/4 " truss rod wrench in my town and around. Even a short Internet research shows no effort. O.k. we have a different measurement here in Germany (cm vs. inches) but these two worlds seem to have a distance like galaxies. So any help (may be from european members) highly appreciated before I have to order one from the mothership. Thanks Harald adriaan Senior Member Username: adriaan Post Number: 634 Registered: 6-2002 Posted on Monday, October 24, 2005 - 4:25 am:    I ordered one from the Dutch importer, Edwin van Huik (http://www.connectionbult.com/bass/instruments.html). I guess Station Music should have soe in stock too ... I should add that it wasn't the 'official' truss rod wrench, but it works nonetheless! (Message edited by adriaan on October 24, 2005) davehouck Moderator Username: davehouck Post Number: 2479 Registered: 5-2002 Posted on Monday, October 24, 2005 - 9:14 am:    Harald; if I can remember on one of my infrequent trips to town, I can pick one up for you at a hardware store. harald_rost Intermediate Member Username: harald_rost Post Number: 103 Registered: 6-2002 Posted on Tuesday, October 25, 2005 - 7:11 am:    Dave, thanks a bunch for your advertised help. I was in several hardware stores here without result. I know that another German Alembic player couldn't get one thru Station Music either. So if you're willing to send one, let me know your cost which I'll cover of course. I can wait. Harald davehouck Moderator Username: davehouck Post Number: 2580 Registered: 5-2002 Posted on Tuesday, November 15, 2005 - 2:46 pm:    Harald; I finally got in to town today and picked up your wrench. Please email your physical address and phone number to me. Apparently I'm supposed to attach some kind of customs form to the envelope but I haven't figured that part out yet. Does anybody know what I'm supposed to do? My plan was just to wrap the wrench in a piece of paper and stick it in a normal airmail envelope (it's a very small wrench). harald_rost Intermediate Member Username: harald_rost Post Number: 104 Registered: 6-2002 Posted on Wednesday, November 16, 2005 - 12:12 am:    Dave, you have Email with my adress and phone number. Thanks so much. Yes, the way you described will do the trick. Declare it as "gift". Harald davehouck Moderator Username: davehouck Post Number: 2617 Registered: 5-2002 Posted on Monday, November 21, 2005 - 1:11 pm:    I made another trip in to town today. Went by the post office, filled out the green customs form, and mailed off the wrench. Let me know when you get it!