| Author | Message | ||
| Joey Wilson (bigredbass)
Junior Username: bigredbass Post Number: 21 Registered: 9-2002 |
Do any of you have any experience with BAG END products, or more specifically a BAG END/ELF rig? I'm intrigued by this technology, and was surprised to hear it was orginated by Ed Long and Ron Wickersham (hey, I've heard of this guy !) Would like to hear from anyone that's used this gear, OK? Best Regards, Joey Wilson | ||
| Donn Lewis (81seriesi)
New Username: 81seriesi Post Number: 5 Registered: 5-2002 |
I have an Alembic - Bag End/ELF rig for my series I. I use an F2B pre-amp summing the output into the ELF/M. I have two Bag End cabinets. One is a D10EXD with one 10' elf driver and a std 10" w/ the tweeter. The other cabinet is an S15DX. One side of the ELF/M (sub) goes to the 10" ELF driver. The top end of the ELF/M goes to a 10" X driver and the S15DX. A QSC Powerlight 1.0 drives both the D10EXD cabinet and the S15DX cabinet. A picture of my rig can be seen on the website. The thing I love about the ELF rig is that it is highly accurate in its reproduction. What you put in is what you get out. I like a clean sound and the ELF technology gets me a pretty accurate sound from 18HZ to 20K HZ. Having a series I and an "all Wickersham" rig is a joy to play. |
