Shielding paint

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message willie Intermediate Member Username: willie Post Number: 102 Registered: 11-2003 Posted on Tuesday, November 18, 2008 - 11:35 am:    Can anyone tell me of a paint that can be used for shielding pick up and control cavities. I know Alembic uses a silver paint but I don't know if its available. I have a Music Man Stingray 5 that gets a buzzing sound. Its not the electronics because they were replaced with Seymour Duncan Basslines Pre-amp & pick up. The only thing I can think left to do is shield everything but I'd rather use the paint than foil paper elwoodblue Senior Member Username: elwoodblue Post Number: 601 Registered: 6-2002 Posted on Tuesday, November 18, 2008 - 12:15 pm:    I've seen some shielding paint on ebay... here and here I've been considering the same thing as the copper tape never sticks well enough. lbpesq Senior Member Username: lbpesq Post Number: 3387 Registered: 7-2004 Posted on Tuesday, November 18, 2008 - 12:44 pm:    I got mine from Stewart-MacDonald luthier supply. Their web site is stewmac.com. They have lots of cool tools, parts, and all kinds of stuff for building and repairing string instruments. I've had nothing but good experiences dealing with them. Bill, tgo willie Intermediate Member Username: willie Post Number: 104 Registered: 11-2003 Posted on Tuesday, November 18, 2008 - 2:37 pm:    Thank you very much. I'll check into stewmac.com