Author |
Message |
mica
Moderator Username: mica
Post Number: 1691 Registered: 6-2000
| Posted on Monday, May 24, 2004 - 11:58 am: | |
Looks like we need a good place to get Rory's custom details all ironed out. Chip is ready to get the body going, so the first thing we need to do is decide on the body shape. When Rory visted last Friday, we came up with a smooth bottomed-Series I Standard shape that wasn't too flat or too big. Roght now, I've asked Chip to hold off the body work until we're totally clear. So, design away!!!!!! |
rklisme
Junior Username: rklisme
Post Number: 25 Registered: 5-2004
| Posted on Monday, May 24, 2004 - 12:08 pm: | |
Mica I am sure you have received my e-mails from this weekend! I will go with the 3/4 K body style with Omega cut with the other options I included. I will call you to confirm. Thanks! Rory |
mica
Moderator Username: mica
Post Number: 1692 Registered: 6-2000
| Posted on Monday, May 24, 2004 - 1:06 pm: | |
Okay, we've got 3/4K style on plan. Now for the Omega detail. You've requested a Heart omega with an extended stinger tail. That's a little confusing - we make a Heart Omega and a Stinger Omega, so are you asking for one of these variations or for a new design? The Stinger Omega has the little heart tip extend out beyond the tips of the omega cut. Also, the 3/4 K style usually has some tummy shaping and sometime elbow carving - do you want either of these details on your bass? I'll pick out a nice 3A back for your bass. I do not believe this change will affect the control layout, but we'll review it and let you know if anything comes up. On the second email, you mentioned recessed straplocks on the order too, and that you wanted a plain Omega. Just let me know which way to go. |
rklisme
Junior Username: rklisme
Post Number: 26 Registered: 5-2004
| Posted on Monday, May 24, 2004 - 2:05 pm: | |
Mica Plain Omega is fine. I was getting a little over the top with ideas and then I pulled myself back into reality. I really like the body of Bill's bass and there is a 5string quilted maple that looks simular as well in the Showcase. I have already contacted Evan at Bass Northwest so I am sure he will be contacting you or Susan shortly. Let the festivities begin! Rory |
rklisme
Junior Username: rklisme
Post Number: 27 Registered: 5-2004
| Posted on Monday, May 24, 2004 - 2:10 pm: | |
Mica The bass I was refering to is Marks 5string quilted Maple. If we could re-create that in a 4string I will be very, very, happy! Thanks as always. Rory |
mica
Moderator Username: mica
Post Number: 1693 Registered: 6-2000
| Posted on Monday, May 24, 2004 - 2:19 pm: | |
Okay, got it on the regular Omega 3/4K shape. There's an example of a 4-string 3/4K in the Alembic Store. It's not Maple, and it's got a Point carving, but it should give you a good idea of how the shape translates to 4-strings. I prefer the Omega on this shape for my personal taste. |
mica
Moderator Username: mica
Post Number: 1694 Registered: 6-2000
| Posted on Monday, May 24, 2004 - 2:31 pm: | |
Mark's bass has the tummy and elbow contouring, did you want that on your bass too? |
rklisme
Junior Username: rklisme
Post Number: 28 Registered: 5-2004
| Posted on Monday, May 24, 2004 - 3:21 pm: | |
Mica Yes on the contouring? Thanks for asking?
|
mica
Moderator Username: mica
Post Number: 1695 Registered: 6-2000
| Posted on Monday, May 24, 2004 - 4:10 pm: | |
Great - I've sent you an email with all the changes for you to confirm. Shoot me a reply with an OK and I can get Chip working on your body in the AM.
|
rklisme
Junior Username: rklisme
Post Number: 29 Registered: 5-2004
| Posted on Thursday, May 27, 2004 - 6:22 pm: | |
Mica, Are there any drawings on the board? If there is could you share a few! |
mica
Moderator Username: mica
Post Number: 1702 Registered: 6-2000
| Posted on Friday, May 28, 2004 - 11:15 am: | |
The body shape you changed to is a shape we use a template to cut out, so there's no drawing planned for your bass, we just draw directly on the wood with the template before we cut it out. I will be happy to post some progress pictures for you, probably not until next week. |
rklisme
Junior Username: rklisme
Post Number: 30 Registered: 5-2004
| Posted on Friday, May 28, 2004 - 12:00 pm: | |
Mica Thanks for the info. Have a great weekend! Rory
|
rklisme
Junior Username: rklisme
Post Number: 35 Registered: 5-2004
| Posted on Wednesday, June 02, 2004 - 4:15 pm: | |
Mica Just wanted to see if you were able to start yet? Rory
|
mica
Moderator Username: mica
Post Number: 1731 Registered: 6-2000
| Posted on Thursday, June 10, 2004 - 3:35 pm: | |
Yes. The neck is constructed and the fingerboard is ready for the blue LEDs to be installed. While that's waiting, the body is underway: Your body is the top of the stack, ready for hollowing. The top and back will probably get added on Monday. Dust is flying! |
rklisme
Junior Username: rklisme
Post Number: 43 Registered: 5-2004
| Posted on Thursday, June 10, 2004 - 7:41 pm: | |
Mica Thanks for responding so quickly. You are the greatest! Rory |
rklisme
Junior Username: rklisme
Post Number: 47 Registered: 5-2004
| Posted on Thursday, June 17, 2004 - 5:49 pm: | |
Mica I know you normally post on Fridays the updates for the week, I just want to make sure I get included with any photo's! Rory |
mica
Moderator Username: mica
Post Number: 1759 Registered: 6-2000
| Posted on Friday, June 18, 2004 - 6:19 pm: | |
Here's the top and back before glueing: Assembly is a little slow - I wasn't aware we had one guy going on a small 4-day vacation (kinda last minute), so looks now like Chip will get your top and back glued to the hollow body this coming Monday. I see I didn't get you pictures of the neck last week, so here's a couple: All the woods look great. That top is wonderful! |
rklisme
Junior Username: rklisme
Post Number: 49 Registered: 5-2004
| Posted on Friday, June 18, 2004 - 6:39 pm: | |
Mica, Looks great so far although the headstock is a little blurry, okay it's a lot blurry but I get the idea. The top looks pretty awesome and I like the back you chose as well. Thanks for the update and wish Happy Fathers Day to Ron! |
mica
Moderator Username: mica
Post Number: 1773 Registered: 6-2000
| Posted on Monday, June 28, 2004 - 1:14 pm: | |
Here's one from "in the clamp" Your bass is the one on the bottom. I'll have some more shots for you this week. |
rklisme
Member Username: rklisme
Post Number: 56 Registered: 5-2004
| Posted on Monday, June 28, 2004 - 7:08 pm: | |
Cool More pics would be great! Thanks Mica! Rory |
rklisme
Member Username: rklisme
Post Number: 59 Registered: 5-2004
| Posted on Saturday, July 10, 2004 - 7:53 am: | |
Mica Any new pics to post? I would love to see the progress! Rory |
valvil
Moderator Username: valvil
Post Number: 488 Registered: 7-2002
| Posted on Monday, July 12, 2004 - 4:50 pm: | |
Hello Rory, I don't have any pictures of your bass to post, Mica may have some, and I'm sure she'll post them as soon as she has time; in the meantime I can tell you that your bass is looking gorgeous; I was in the shop a few minutes ago and Tony was busy carving it. Valentino |
rklisme
Member Username: rklisme
Post Number: 60 Registered: 5-2004
| Posted on Monday, July 12, 2004 - 7:33 pm: | |
Val Thanks for the update, as you can imagine I am feeling the pains of anticipation. I look forward to seeing some pics soon! Rory |
mica
Moderator Username: mica
Post Number: 1820 Registered: 6-2000
| Posted on Friday, July 16, 2004 - 8:36 pm: | |
Ack! Your bass is in the spray department, and my timing was horrible this week, always caught Bob spraying. I'm hoping to get a photo while I'm at work on Sunday. Sorry I didn't get you a shot this week. |
rklisme
Member Username: rklisme
Post Number: 62 Registered: 5-2004
| Posted on Sunday, July 18, 2004 - 12:26 pm: | |
I would love to see my bass in production if you get a chance. It has been a while since I have seen a pic. Rory |
mica
Moderator Username: mica
Post Number: 1828 Registered: 6-2000
| Posted on Monday, July 19, 2004 - 10:33 pm: | |
I think Bass Northwest only has one of these on order: It was already getting rubbed out today. And one of the back. Getting close. Tomorrow we'll be finishing the rubout. Then it rests a day or two before buffing. Maybe we'll be ready for you next week. Let's just hope those new cases show up like they're supposed to. |
kmh364
Advanced Member Username: kmh364
Post Number: 221 Registered: 9-2003
| Posted on Tuesday, July 20, 2004 - 5:06 am: | |
Rory: It's looking awesome, man! You know how I HATE quilted mapled & purpleheart, LOL! |
bracheen
Senior Member Username: bracheen
Post Number: 503 Registered: 11-2003
| Posted on Tuesday, July 20, 2004 - 10:46 am: | |
Rory/Kevin Quilted maple seems to be the wood of the day. Both basses are beautiful! Photos don't do quilted woods justice. Sam |
bassman10096
Senior Member Username: bassman10096
Post Number: 502 Registered: 7-2003
| Posted on Tuesday, July 20, 2004 - 11:35 am: | |
Wow! Gonna be pretty.... |
rklisme
Member Username: rklisme
Post Number: 63 Registered: 5-2004
| Posted on Tuesday, July 20, 2004 - 12:44 pm: | |
Hey Guy's thanks for the compliments, as you can imagine there is a big smile on my face. Can't wait to see the final product! Bill, you have convinced me to go with Coco bolo next, I am comtiplating a 6 string! I need to inquire about the upgraded electronics I don't see holes drilled for them. Rory |