Steve's Super Quilted Maple Custom Eu... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Factory to Customer » Archive Through Dec 31 2005 » Steve's Super Quilted Maple Custom Europas « Previous Next »

Author Message
mica
Moderator
Username: mica

Post Number: 2026
Registered: 6-2000
Posted on Thursday, October 21, 2004 - 1:46 pm:   Edit Post

Here's some necks I hear are for your next set of Europa customs:
necks
This was taken last week - the necks have pegheads on them now and are ready for veneering.

And the body laminates are getting cut from this billet:
QM
This is hot all the way through - the back is just as amazing. We're pretty sure we can get all the slices from this barring any internal defects. If there's any problem there, we'll be using this as a backup:
QM second string
It's no slouch either, but the figure fades away a bit on the underside.
hollis
Senior Member
Username: hollis

Post Number: 452
Registered: 11-2003
Posted on Thursday, October 21, 2004 - 3:46 pm:   Edit Post

It's hard to believe that quilted maple is smooth.

It's unreal!
rklisme
Intermediate Member
Username: rklisme

Post Number: 132
Registered: 5-2004
Posted on Thursday, October 21, 2004 - 4:22 pm:   Edit Post

Hollis

I could not believe how great that quilted maple looked. You are going to be sooooooooooo happy with that as a choice. The depth is unreal!

Rory
hollis
Senior Member
Username: hollis

Post Number: 454
Registered: 11-2003
Posted on Thursday, October 21, 2004 - 4:40 pm:   Edit Post

Rory,

I wish those pieces were for me, but, alas they belong to Steve. But I'm sure Steve is very happy indeed!
the_mule
Advanced Member
Username: the_mule

Post Number: 291
Registered: 1-2004
Posted on Friday, October 22, 2004 - 5:30 am:   Edit Post

Well, that's .... simply .... UNBELIEVABLE! I always wondered why you don't see many maple Europas. They look wonderful and this one may very well be a trendsetter. That quilt is out of this world! Another FTC thread I'll be following with great pleasure...

Wilfred
mica
Moderator
Username: mica

Post Number: 2159
Registered: 6-2000
Posted on Friday, December 03, 2004 - 7:34 pm:   Edit Post

Here's Chip fitting one of those amazing tops:

Chip fits top
mica
Moderator
Username: mica

Post Number: 2165
Registered: 6-2000
Posted on Tuesday, December 07, 2004 - 8:10 pm:   Edit Post

Here's one with the top in place:
with Tony
There's a line that Tony just drew for slicing off the butt end of the neck lams.

after cut
And here's the bass after cutting the extra part off.
mica
Moderator
Username: mica

Post Number: 2170
Registered: 6-2000
Posted on Wednesday, December 08, 2004 - 7:25 pm:   Edit Post

You can kinda see in the pictures from yesterday that the heel is still real chunky. Well, no more:

Tony carved

Tony says you are really gonna love the neck carving.
flaxattack
Advanced Member
Username: flaxattack

Post Number: 289
Registered: 4-2004
Posted on Thursday, December 09, 2004 - 5:34 pm:   Edit Post

tony is to carving as what eric clapton is to guitar playing
mica
Moderator
Username: mica

Post Number: 2186
Registered: 6-2000
Posted on Wednesday, December 15, 2004 - 5:50 pm:   Edit Post

Now with sealers!

in spray, sealed

Chip got the other one's top fitted today, so it will catch up with the others soon. I told mom that you guys need to talk again about the colors.
s_wood
Intermediate Member
Username: s_wood

Post Number: 102
Registered: 5-2002
Posted on Thursday, December 16, 2004 - 7:01 am:   Edit Post

Wow!
jeff
Member
Username: jeff

Post Number: 88
Registered: 12-2003
Posted on Thursday, December 16, 2004 - 9:49 am:   Edit Post

Mr. Steve Wood,

Are these your basses, or is this another lucky Steve?
s_wood
Intermediate Member
Username: s_wood

Post Number: 104
Registered: 5-2002
Posted on Thursday, December 16, 2004 - 9:51 am:   Edit Post

That would be me, Jeff.
jeff
Member
Username: jeff

Post Number: 89
Registered: 12-2003
Posted on Thursday, December 16, 2004 - 10:51 am:   Edit Post

Steve,

You have, once again, reinforced my opinion that you are one of the most fortunate Alembic owners alive. Isn't it great to see yet another masterpiece come to life? And you have at least three in progress!

Mica states at the top of this thread that this is your "next set" of Europa customs. Does that mean that you already have a first set? It appears that you have opted for the ebony neck lams on this set. Nice choice. What electronic packages will these Europa's have? Please share details.

It seems like things may be getting crowded at the Wood household so, I again offer to take the Burl Rosewood or Quilted Coco bolo basses off your hands:-).

Jeff the Envious One.
bigbadbill
Intermediate Member
Username: bigbadbill

Post Number: 142
Registered: 10-2003
Posted on Friday, December 24, 2004 - 9:08 am:   Edit Post

"Next set"??????? Wow....I am not worthy. I also second Jeff!!!! Now THAT'S how to make an American Quilt....
mica
Moderator
Username: mica

Post Number: 2208
Registered: 6-2000
Posted on Wednesday, January 12, 2005 - 11:39 am:   Edit Post

Here's a check of the amber tint:

light amber tint on bod

light amber tint on peghead

If you like it the way it is, we'll proceed with the clear top coats. We can also add another coat of amber if you want the color more intense. Either way, the wood will look great.
mica
Moderator
Username: mica

Post Number: 2209
Registered: 6-2000
Posted on Wednesday, January 12, 2005 - 2:27 pm:   Edit Post

And the blue-ish one:

1

2

I think we need to add one more overall blue coat and an outside shot of dark blue for the very edge to look like the picture you supplied. Bob's got both of these on hold until we hear from you.

Let us know if you like them the way they are or if you want to add more color.
hollis
Senior Member
Username: hollis

Post Number: 594
Registered: 11-2003
Posted on Wednesday, January 12, 2005 - 2:39 pm:   Edit Post

Oh! These are breathtaking!
jeff
Member
Username: jeff

Post Number: 92
Registered: 12-2003
Posted on Thursday, January 13, 2005 - 6:21 am:   Edit Post

Holy S#*t Steve!! The tint adds even more of a 3D effect to the basses and enhances the puffy-cloud like quality of the quilts. The bluish-green tint looks especially awesome! I'm guessing that you are one happy camper right now. Congratulations, my friend.
the_mule
Advanced Member
Username: the_mule

Post Number: 392
Registered: 1-2004
Posted on Thursday, January 13, 2005 - 9:33 am:   Edit Post

Wow, love the blue one! Very attractive finish, if one day I'm able to custom order this will be something to seriously consider!

Wilfred
s_wood
Intermediate Member
Username: s_wood

Post Number: 109
Registered: 5-2002
Posted on Thursday, January 13, 2005 - 5:26 pm:   Edit Post

Whoa....

Y'all/youse guys really nailed those 2!!!!! The amber bass is perfect, and I will defer to you about adding the last coat of blue on the blueburst. If it will turn the interior color a bit more toward turquoise (while mellowing out the greenish tint) I say do it, but only if it won't obscure the quilt. Your call.

Can't wait to see the cherry sunburst!!!

Unbelievable!!!!!!!

(Message edited by s_wood on January 13, 2005)
mica
Moderator
Username: mica

Post Number: 2212
Registered: 6-2000
Posted on Thursday, January 13, 2005 - 5:35 pm:   Edit Post

So I take it you just want us to start adding clear coats?

Two people that visited today called your blue bass "Ocean." One guy said, "that looks just like rolling waves in the ocean."
mica
Moderator
Username: mica

Post Number: 2213
Registered: 6-2000
Posted on Thursday, January 13, 2005 - 5:39 pm:   Edit Post

Cross-posting caught us :-)

Yes, another coat of blue will tone down the greenishness from the yellow of the wood, it won't obscure the figure. I'll let Bob know to add it. How about the dark shot around the edge? The picture you supplied went nearly opaque, but only at the very edge.

I haven't seen the cherry sunburst yet (I've had bad timing with the spray booth), but Mary said it was drop-dead gorgeous.
s_wood
Intermediate Member
Username: s_wood

Post Number: 111
Registered: 5-2002
Posted on Thursday, January 13, 2005 - 5:55 pm:   Edit Post

It's so hard to judge color this way...I think I like the dark edge, but only at the last 1/2" or s
so, like in the photos I sent...but it's really your call...I trust you to do the best thing. Another coat of blue to tone down the greenishness is the way to go, though.

She sure looks beautiful...
the_mule
Advanced Member
Username: the_mule

Post Number: 400
Registered: 1-2004
Posted on Friday, January 14, 2005 - 6:03 am:   Edit Post

Personally I would definitely want to keep 'Ocean' the way she is, but (unfortunately) she's not mine... She's my personal favourite of this entire FTC-section, what a fabulous bass!

Wilfred
mica
Moderator
Username: mica

Post Number: 2219
Registered: 6-2000
Posted on Tuesday, January 18, 2005 - 6:14 pm:   Edit Post

It is hard to tell on computer monitors with different color profiles. Even though, it's still possible to get a rough idea. Here's one with the additional blue across all:

ocean 2

In person, the center looks much more blue, almost no green at all. I'm sure you will love it. I didn't take a picture, but the back of the body, neck and peghead are also in the burst pattern. Thanks for your vote of confidence, Steve. Bob will make the decision about the dark edge - he's so good with color/wood.

Here's the cherry sunburst, but it's already back in spray to get a more amber-y center:

cherrysun1

cherrysun2

You can see the lighting in the drying room shows a bit yellow (those walls are almost white). When I took these pictures, the center was nearly clear, and Bob and I both agreed that some more amber at the center was needed to look more like these pictures do.
s_wood
Intermediate Member
Username: s_wood

Post Number: 113
Registered: 5-2002
Posted on Tuesday, January 18, 2005 - 6:48 pm:   Edit Post

Wow, again!!! The sunburst is really beautiful. Is the grain in the quilt less distinct than the wood in the blueburst, or is it the photo, or the finish?

I think I would be tempted to leave the blueburst bass as is, without the dark edges, but I would like to hear what you and Bob recommend.

You guys are GOOD!

mica
Moderator
Username: mica

Post Number: 2256
Registered: 6-2000
Posted on Friday, February 04, 2005 - 9:07 pm:   Edit Post

Amber is getting dressed up with the gold plated hardware:

getting gold
almost_mingus
Junior
Username: almost_mingus

Post Number: 24
Registered: 5-2004
Posted on Friday, February 04, 2005 - 10:06 pm:   Edit Post

Steve
I am now thoroughly convinced you are the luckiest man alive :]
I would think these three basses should keep you occupied long enough to let the rest of us catch up to your collection... lol. I love the quilt on all of these basses... and the 'ocean burst' is beautiful.
Austin
Dont you have the alembird on the way too?
s_wood
Intermediate Member
Username: s_wood

Post Number: 114
Registered: 5-2002
Posted on Saturday, February 05, 2005 - 1:10 pm:   Edit Post

Yep, the long-awaited Alembird is nearing completion, too. It never rains but it pours!

Them folks at Alembic sure make some purty basses!
s_wood
Intermediate Member
Username: s_wood

Post Number: 141
Registered: 5-2002
Posted on Monday, June 13, 2005 - 8:06 pm:   Edit Post

Within the last 2 weeks I have received the cherry sunburst and the blueburst basses. They are both amazing - the build quality at Alembic keeps getting better! Every Alembic I play is better built than the last one, and every time I think they have achieved perfection I am blown away again.

These basses are also beautiful to look at, especially the blueburst bass which seems to change colors depending upon the viewing angle. The pictues above do not do them justice. I will try to get some decent photos and post them soon, but Mica is pretty good with the jpegs so I don't know if I can do better.

I have also posted my review of the ebony neck laminates here http://alembic.com/club/messages/393/18726.html
Short version: they make a BIG difference, and are absolutely worth the money!

I am a very lucky player!
johnnybassboy
Junior
Username: johnnybassboy

Post Number: 13
Registered: 10-2004
Posted on Tuesday, June 14, 2005 - 4:11 pm:   Edit Post

"Pennies a day" eh? I'm thinking this is starting to appear a lot more like Pennies a minutes!

Congratulations on some Super Cool basses!
dubalbal
Intermediate Member
Username: dubalbal

Post Number: 132
Registered: 10-2004
Posted on Wednesday, June 15, 2005 - 3:34 am:   Edit Post

Hi Steve ,

...no discussion possible : great basses go to great bassists...no discussion possible : we're all great here !!!...and once more : congratulations for your magnificent instruments , enjoy !!!

ALAIN
jeff
Intermediate Member
Username: jeff

Post Number: 107
Registered: 12-2003
Posted on Thursday, June 16, 2005 - 10:51 am:   Edit Post

Steve:

Excellent and comprehensive review of the ebony neck lams. I remember when you were agonizing over this decision because you love the sound of the purple heart lams but it sounds like there are no regrets. These last two basses are an awesome addition to an even more awesome collection. I look forward to seeing more pictures of the family.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration