Changes / Additions Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Factory to Customer » Bob's Custom Signature Deluxe » Changes / Additions « Previous Next »

Author Message
mica
Moderator
Username: mica

Post Number: 2377
Registered: 6-2000
Posted on Thursday, March 31, 2005 - 2:41 pm:   Edit Post

Here's how your work order 13964 reads as of now:

NECK
scale: 30.75
strings: 4
7-piece through body neck MAP|PH|MAP|EB|MAP|PH|MAP
fingerboard: ebony with abalone inlays 1.5x2.25 (like Stanley's)
side markers: Red LEDs with 2 amber each @ 12th and 24th
peghead: Crown, bevelled

BODY
Sandwich:
Coco Bolo top [wood to be selected]
Maple pinstripe
Purpleheart laminate
Maple pinstripe
Vermilion core, hollow
Maple pinstripe
Purpleheart laminate
Maple pinstripe
Coco Bolo Back

shape: Small Standard, no tummy or elbow carving

ROUTING:
pickups: 2 FatBoy
truss rod cover: 4R (standard for SC model)
backplates: brass
electronics: 2 volume, 2 filter, 2-3 position Q siwtches

FINISH:
polyester gloss with satin neck feel

SETUP:
logo: silver no script
hardware: gold plated
strap anchor: gold straplocks
strings: .045-.065-.080-.105

case: hardshell

Please review this list of features. Construction has not yet started, so make sure that any changes, additions, misunderstood instructions are sorted out quickly. Once the top wood is selected, Chip will start building right away.
bsee
Senior Member
Username: bsee

Post Number: 889
Registered: 3-2004
Posted on Friday, April 29, 2005 - 10:31 am:   Edit Post

Highlighted in red are the adjustments/clarifications that came out of my phone conversation with Valentino yesterday:


NECK
scale: 30.75
strings: 4
7-piece through body neck MAP|PH|MAP|EB|MAP|PH|MAP
fingerboard: ebony with abalone inlays 1.5x2.15 (like Stanley's)
 1.5 is the nut width, 2.15 is the string spacing, center-to-center, at the bridge (approx 18mm)
side markers: Red LEDs with 2 amber each @ 12th and 24th with internal dimmer pot
peghead: K Crown, bevelled
 This is the headstock that is narrower near the neck to go with the narrow nut, right? Chip's choice on headstock sandwich to go with the rest of the woods and show off the bevel. Very dark and symmetrical peghead face to bring out the hardware and logo

BODY
Sandwich:
Coco Bolo top [3766 approximately per my template and adjusted to Chip's preference]
Maple pinstripe
Purpleheart laminate
Maple pinstripe
Vermilion core, hollow
Maple pinstripe
Purpleheart laminate
Maple pinstripe
Coco Bolo Back [3774 with bookmatch reversed and the dark curve around the swirly area following the body contour. I'd like to see a template on this before it is cut, but I can live without it.]

shape: Small Standard, no tummy or elbow carving

ROUTING:
pickups: 2 FatBoy
truss rod cover: 4R (standard for SC model)
 clarification: Series pickup positioning, so the truss rod cover is small
backplates: brass
electronics: 2 volume, 2 filter, 2-3 position Q switches
 The positions of the LED switch and 1/4" jack will be reversed with the jack closer to the neck

FINISH:
polyester gloss with satin neck feel

SETUP:
logo: silver no script
hardware: gold plated
strap anchor: gold straplocks
 mounted using threaded inserts rather than screws, if possible
strings: .045-.065-.080-.105

case: hardshell
bsee
Senior Member
Username: bsee

Post Number: 947
Registered: 3-2004
Posted on Friday, September 16, 2005 - 12:10 pm:   Edit Post

Just a note to capture the results of a phone conversation that Mica and I had yesterday:

1. The pickup positioning and truss rod cover will be as per Stanley's 30th anniversary bass. This corresponds to the positioning of older Series instruments, not the current standards.

2. We will go with the .040-.060-.080-.100 long scale string set.

3. There will be a stop order to discuss the custom inlay at the appropriate time if we haven't nailed it sooner.

-Bob
flaxattack
Senior Member
Username: flaxattack

Post Number: 598
Registered: 4-2004
Posted on Saturday, September 17, 2005 - 9:20 am:   Edit Post

isnt this the same bob who said there were no changes after he placed the order>?

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration