Joe's Spalted Maple Orion

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message mica Moderator Username: mica Post Number: 2505 Registered: 6-2000 Posted on Wednesday, June 08, 2005 - 6:57 pm:    Spalted Maple, looks so sweet: and this fun picture, which once the body is glued together, can never happen again: the_joe New Username: the_joe Post Number: 1 Registered: 6-2005 Posted on Tuesday, June 14, 2005 - 2:48 pm:    im really excited about this new addition to my family. if its at all possible could you post any more pics so i can see how its coming along. joe davehouck Moderator Username: davehouck Post Number: 1912 Registered: 5-2002 Posted on Wednesday, June 15, 2005 - 6:45 am:    Hi Joe; that's a nice piece of Spalted Maple! mica Moderator Username: mica Post Number: 2567 Registered: 6-2000 Posted on Monday, June 27, 2005 - 11:00 pm:    Found your bass prepped and ready for the next coat of finish: The lights in the drying room are a bit yellow, and of course the entire surface is sanded, but you can see it shaping up nicely. davehouck Moderator Username: davehouck Post Number: 1958 Registered: 5-2002 Posted on Tuesday, June 28, 2005 - 7:05 am:    Very nice!! The bookmatch is especially nice! the_joe New Username: the_joe Post Number: 2 Registered: 6-2005 Posted on Tuesday, June 28, 2005 - 3:00 pm:    killer! that looks great. i know you got a lot to do. but id really love to see the headstock too! i can see the holes for the electronics, but where is the hole for the led switch? thanks so much joe mica Moderator Username: mica Post Number: 2572 Registered: 6-2000 Posted on Tuesday, June 28, 2005 - 3:16 pm:    The hole for the LED switch is drilled by hand at the very end of the process. I will get you more pictures of your bass, including your headstock when it's not in the dryig room. There just ins't space to move around in there.