Control layout

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message mica Moderator Username: mica Post Number: 8311 Registered: 6-2000 Posted on Tuesday, November 04, 2014 - 5:26 pm:    Number 1: or number 2: The stereo/mono switch is down near the edge. or number 3: The stereo/mono switch is left-most in the line of switches. In any case, LEDs come on when you plug in, as requested. moonliner Advanced Member Username: moonliner Post Number: 283 Registered: 12-2004 Posted on Wednesday, November 05, 2014 - 3:21 pm:    Maybe slightly more to the left please? mica Moderator Username: mica Post Number: 8313 Registered: 6-2000 Posted on Wednesday, November 05, 2014 - 5:35 pm:    Here's the picture is sent you a few minutes ago: (Ooops! I only had 4 hat knobs in hand in the shop, they will all be hats on your bass) These are shifted over to the left slightly. If this is a go, we'll plot them out all nice and straight and drill this sucka! moonliner Advanced Member Username: moonliner Post Number: 284 Registered: 12-2004 Posted on Wednesday, November 05, 2014 - 5:40 pm:    That looks great. Let's light this candle! mica Moderator Username: mica Post Number: 8314 Registered: 6-2000 Posted on Wednesday, November 05, 2014 - 6:05 pm:    Okie dokie! I'm leaving this as a note for Jack to do his magic in the morning tomorrow. Will probably route the bridge block at the same time. Then he'll sand the edges of the plates (they will be much nicer that way) and start stuffing electronics probably Monday or Tuesday if all goes well.