Build Record / Discussion Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Factory to Customer » Brad's Custom Spyder 4 » Build Record / Discussion « Previous Next »

Author Message
mica
Moderator
Username: mica

Post Number: 3651
Registered: 6-2000
Posted on Thursday, October 05, 2006 - 6:47 pm:   Edit Post

Every one starts with a neck:
neck

And the peghead before cutting the shape:
peghead veneer pack

The body is almost ready to glue on the neck:
body

Just as soon as the LEDs get installed on the front of the fingerboard:
fingerboard

The side LEDs are in place:
fingerboard

There should be new pictures every few days over the next couple of weeks.
mtnst8
New
Username: mtnst8

Post Number: 9
Registered: 8-2006
Posted on Thursday, October 05, 2006 - 7:59 pm:   Edit Post

Mica:

Smiles! :-) It is such a wonderful thing that your customers can participate in the build process through these forums. This is really exciting for me. The pictures are great. Keep 'em coming! And thanks so much.

Brad
mica
Moderator
Username: mica

Post Number: 3663
Registered: 6-2000
Posted on Wednesday, October 11, 2006 - 4:16 pm:   Edit Post

The whole thing is in the pipe clamps for the night:

in pipes
mtnst8
Junior
Username: mtnst8

Post Number: 11
Registered: 8-2006
Posted on Monday, October 16, 2006 - 2:12 pm:   Edit Post

Mmmm. Yum. I can't wait to see the grain with some finish on it. Looking good!

Brad
mtnst8
Junior
Username: mtnst8

Post Number: 12
Registered: 8-2006
Posted on Sunday, October 22, 2006 - 1:17 pm:   Edit Post

Any new news on the Spyder? Thanks!

Brad
mica
Moderator
Username: mica

Post Number: 3705
Registered: 6-2000
Posted on Tuesday, October 24, 2006 - 5:05 pm:   Edit Post

I was able to sneak into the drying room a few mintues ago and get a shot of your bass from the back - you haven't seen that side of it yet:
spray
mtnst8
Junior
Username: mtnst8

Post Number: 13
Registered: 8-2006
Posted on Thursday, October 26, 2006 - 5:53 am:   Edit Post

Wow. I love scrolling back and forth between the "drying" picture and the one before it to see how the finish brings out the grain. The difference is amazing.
tbrannon
Advanced Member
Username: tbrannon

Post Number: 212
Registered: 11-2004
Posted on Thursday, October 26, 2006 - 11:38 am:   Edit Post

Absolutely killer grain! I love the way the flame goes from horizontal to vertical on that bottom right corner. I noticed it on the earlier pictures (without the finish) and wondered if my eyes were fooling me. Guess not.

What kind of wood is sandwiched between the maple? Is that walnut?
mtnst8
Junior
Username: mtnst8

Post Number: 14
Registered: 8-2006
Posted on Thursday, October 26, 2006 - 4:53 pm:   Edit Post

Correct you are, Toby. Walnut it is. Here is the link to the Featured Custom page for the Spyder basses: http://www.alembic.com/info/fc_spyders.html. I am having a few minor changes done but for the most part, those specs are what you'll be seeing here.
ox_junior
Advanced Member
Username: ox_junior

Post Number: 351
Registered: 3-2004
Posted on Monday, October 30, 2006 - 11:48 pm:   Edit Post

What are you having done that's different from the stock Spyder? Just curious.
mtnst8
Junior
Username: mtnst8

Post Number: 16
Registered: 8-2006
Posted on Tuesday, October 31, 2006 - 7:39 am:   Edit Post

Nothing major. Mostly just cosmetic things. The most noticeable will be the chrome hardware. Also having the logo inlaid with shell, abalone inlays instead of m.o.p., side and front laser led's in amber, recessed straplock on the bottom. Finally, I'm having the tuners angled towards the body slightly. Not sure my arms could've reached all the way out there on a 35" scale! I had originally thought I was going to do a custom inlay on the back of the peghead but I don't think that's going to happen now.

Correction - It's a 34" scale.

(Message edited by mtnst8 on October 31, 2006)
adriaan
Senior Member
Username: adriaan

Post Number: 1107
Registered: 6-2002
Posted on Tuesday, October 31, 2006 - 8:47 am:   Edit Post

Whatever happened to Susan's original plan for "an ebony and silver spider on the headstock" - Entwistle Tribute Bass?
mtnst8
Junior
Username: mtnst8

Post Number: 17
Registered: 8-2006
Posted on Tuesday, October 31, 2006 - 10:22 am:   Edit Post

Adriaan,

I don't know, that's a good question. In fact, I ordered mine through Bass Central and the description on their website still reflects that inlay as part of this model. To my knowledge, the spider inlay was deleted and not included on any that have yet been produced. Anybody know if that's the case?

Brad
mica
Moderator
Username: mica

Post Number: 3720
Registered: 6-2000
Posted on Tuesday, October 31, 2006 - 11:09 am:   Edit Post

We were never quite satisfied with the way the spider turned out, so we scrapped the idea. We did not produce a single instrument with the inlay.
mtnst8
Junior
Username: mtnst8

Post Number: 18
Registered: 8-2006
Posted on Thursday, November 02, 2006 - 6:58 am:   Edit Post

Hello Mica:

Greetings. We should be getting close now I think. Can I have a quick status check? ETA? Thank you.

Brad
mica
Moderator
Username: mica

Post Number: 3742
Registered: 6-2000
Posted on Friday, November 03, 2006 - 2:24 pm:   Edit Post

Your bass is ready to get the body inlays:
got inlays?

It depends on how many more coats of spray it will need after the inlay. I'll know more once the silver is in.
tbrannon
Advanced Member
Username: tbrannon

Post Number: 218
Registered: 11-2004
Posted on Friday, November 03, 2006 - 3:37 pm:   Edit Post

Looking sweet! I like those Paua fretboard inlays.

I'm also pretty curious about that fretless blue Rogue that's hiding behind yours. Pretty nice neighborhood they've got going there.
mtnst8
Junior
Username: mtnst8

Post Number: 19
Registered: 8-2006
Posted on Friday, November 10, 2006 - 1:13 pm:   Edit Post

Mica:

These pictures are addictive. With each new one I crave more and more. I love what I'm seeing. I'm really curious about the peghead end and the inlay work up there. I'd also like to see the silver being inlaid. Is that all one piece or is it puzzled together? Hate to keep asking the same question but I'm curious about an ETA.

Brad

(Message edited by mtnst8 on November 10, 2006)
jaurigemma
Member
Username: jaurigemma

Post Number: 86
Registered: 3-2003
Posted on Monday, November 13, 2006 - 3:37 am:   Edit Post

Okay, I don't mean to steal the thread here, as this is an awesome looking Spyder. But blue is my favorite color, and I am dying to get a better look at that Blue Europa behind the spider. Mica, can you post that Blue Europa to another thread?
mtnst8
Junior
Username: mtnst8

Post Number: 20
Registered: 8-2006
Posted on Sunday, November 19, 2006 - 7:12 pm:   Edit Post

Mica:

Any word from the Mothership on this one? I'm on the edge of my seat waiting for news. Thanks,

Brad
inthelows
Advanced Member
Username: inthelows

Post Number: 228
Registered: 11-2006
Posted on Friday, December 22, 2006 - 5:55 am:   Edit Post

Love the wood accents. Very sharp spyder!
NLP
mica
Moderator
Username: mica

Post Number: 3919
Registered: 6-2000
Posted on Thursday, December 28, 2006 - 7:16 pm:   Edit Post

Inlays in!

inlay

inlay

James finished the preset, and we should be getting the chrome back around January 8. Hopefully the rest of the finish will be done by then.
mtnst8
Junior
Username: mtnst8

Post Number: 26
Registered: 8-2006
Posted on Friday, January 05, 2007 - 1:28 pm:   Edit Post

Mica,

Looking good! I can't wait to see the inlaid logo and how the chrome looks. So, if the plating comes back around the 8th does that look good for a delivery that same week?

Also, one quick question to clarify something I've been trying to read up on: Is "pure lemon oil" the same thing as "pure lemon essential oil?" I know there are several threads on this but I can't find one that addresses this specifically. Thanks,

Brad
bob
Senior Member
Username: bob

Post Number: 796
Registered: 11-2002
Posted on Friday, January 05, 2007 - 7:30 pm:   Edit Post

"pure lemon oil" is probably also "essential", but like any marketing claim, you just need to check.

If you've read the other threads, then you understand that you don't want something like "lemon flavored mineral oil". You want an oil that is produced solely by squeezing the zest (yellow colored portion) of the rind.

Check the ingredient list, or whatever it says about how it's made. As long as it's just lemons, you've got the right stuff.

I happen to be using Boyajian, and they leave out the word "essential". It basically just means it's the "essence", and it sounds cool for marketing purposes, but it's still just pure oil from lemon zest.
mtnst8
Junior
Username: mtnst8

Post Number: 27
Registered: 8-2006
Posted on Monday, January 08, 2007 - 8:04 pm:   Edit Post

Thanks Bob. That was just the info I was looking for on the lemon oil. I was able to find that brand on eBay so at least I know I am headed in the right direction. Thanks again.

Any news on the plating, Mica? Thanks,

Brad
mica
Moderator
Username: mica

Post Number: 3986
Registered: 6-2000
Posted on Thursday, January 11, 2007 - 5:45 pm:   Edit Post

We got the plating back, James is almost done with the setup. I took this picture moments ago:

mostly done

He calls it the Spyder Deluxe.

I'd like to speak with you before we install the straplocks. That's the last thing to do. We should have the recessed ones in any day. We had tons of gold ones, but that won't work for yours. I'll be around all day tomorrow, so call me when you get a moment to chat.
davehouck
Moderator
Username: davehouck

Post Number: 4700
Registered: 5-2002
Posted on Friday, January 12, 2007 - 6:59 pm:   Edit Post

It's a Reverse Spyder!! <g>

Which kinda begs the question, has anyone ever ordered a reverse Spyder or Exploiter. Plenty of room for knobs and switches.
southpaw
Intermediate Member
Username: southpaw

Post Number: 118
Registered: 12-2004
Posted on Saturday, January 13, 2007 - 5:06 pm:   Edit Post

Another reason why my Alembics sound so good; they are set up by a lefty! Keep up the great work James, we appreciate your effort.
In 2004 I had the good fortune of seeing a Spyder being routed for the sterling "web" inlay. The sterling bars are as deep into the body as they are wide, the detail and craftsmanship was amazing. Congrats Brad on a stunning bass.
mtnst8
Junior
Username: mtnst8

Post Number: 28
Registered: 8-2006
Posted on Tuesday, January 16, 2007 - 7:15 am:   Edit Post

Thanks Paul.
Dave, is this kind of what you had in mind on a reverse Spyder?
Reverse Spyder
I don't have the tools to make it look right but that is what I thought of when you asked the question.
I'm holding my breath again. Could ship this week! :-)
Brad
olieoliver
Senior Member
Username: olieoliver

Post Number: 1051
Registered: 2-2006
Posted on Tuesday, January 16, 2007 - 7:45 am:   Edit Post

How about this "reverse"?
southpaw
Intermediate Member
Username: southpaw

Post Number: 127
Registered: 12-2004
Posted on Tuesday, January 16, 2007 - 9:42 am:   Edit Post

Now your talkin' Olie!! A lefty spyder, put some guts in it and send it to my house, it will be well cared for!
davehouck
Moderator
Username: davehouck

Post Number: 4725
Registered: 5-2002
Posted on Tuesday, January 16, 2007 - 11:43 am:   Edit Post

Brad; I was thinking completely reversed as in Olie's picture. It probably wouldn't work well with that big upper horn; but the shot of yours in a reversed playing position looks interesting.
bkbass
Intermediate Member
Username: bkbass

Post Number: 125
Registered: 11-2003
Posted on Wednesday, January 17, 2007 - 7:49 am:   Edit Post

With the lower hip having that much real estate one could install series 5 electronics (assuming with each raise in series number more knobs will added)Lol! I played one or two flipped explorers in my day and they were quite comfortable and balance fairly well. The main problem is playing in the sitting position. Drum stool works chairs usually don't unless your hanging off the edge.
adriaan
Senior Member
Username: adriaan

Post Number: 1225
Registered: 6-2002
Posted on Friday, January 19, 2007 - 8:14 am:   Edit Post

Woo woo - don't tell me Alembic is copying the Warwick Dolphin! J/K of course.
mtnst8
Junior
Username: mtnst8

Post Number: 31
Registered: 8-2006
Posted on Thursday, February 08, 2007 - 12:08 pm:   Edit Post

Thanks to all for the hand-holding through the build process and for your nice comments. My Spyder arrived a couple weeks ago and I can't keep my hands off it. It's wonderful! I'll put up some pictures on a showcase thread soon. And guys...don't forget Valentine's day is just 6 days from now!

Brad
mtnst8
Junior
Username: mtnst8

Post Number: 33
Registered: 8-2006
Posted on Monday, April 23, 2007 - 8:41 am:   Edit Post

Mica:

Any news on my truss rod cover?

Brad
mica
Moderator
Username: mica

Post Number: 4460
Registered: 6-2000
Posted on Monday, April 23, 2007 - 5:28 pm:   Edit Post

I received the new tracing, and the new cover should be completed this week. There's a batch of chrome plating scheduled for the week of May 7th, so it will be ready to go in with that set.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration