Author |
Message |
mica
Moderator Username: mica
Post Number: 4433 Registered: 6-2000
| Posted on Wednesday, April 11, 2007 - 4:58 pm: | |
Here's a piece of Coco Bolo that Val had reserved for you. Since Bob is preparing to do the layouts and get wood dust flying an glue smearing, I wanted to see if this was still the piece you wanted: Your QCB is peeking out below. |
flaxattack
Senior Member Username: flaxattack
Post Number: 1453 Registered: 4-2004
| Posted on Wednesday, April 11, 2007 - 8:49 pm: | |
this was the original top lam for scooter. it has possibilities but would like to see some of the newer stock very swirly, mid to high contrast on the red side if such a beast exists thanks dont think thats a tribute template correct? reminds me of a gator snout if you lift the tape up this was a kind of rich red when we acetoned it if i rem correctly- was almost 2 yrs ago |
mica
Moderator Username: mica
Post Number: 4496 Registered: 6-2000
| Posted on Friday, April 27, 2007 - 5:24 pm: | |
Here's the piece untaped as you requested, and I marked a proposed placement if you go for this piece: I won't be able to show you other slabs until Tuesday, but I've got it marked down so Bob can coordinate with me. I'll post more then if you aren't super thrilled with this one. I saw the body core cut out and waiting, so once we get the layouts done, we'll be ready to get the body assmebled. |
flaxattack
Senior Member Username: flaxattack
Post Number: 1471 Registered: 4-2004
| Posted on Thursday, May 03, 2007 - 8:40 pm: | |
lets lay out the other boards thanks |
flaxattack
Senior Member Username: flaxattack
Post Number: 1472 Registered: 4-2004
| Posted on Friday, May 04, 2007 - 10:53 am: | |
mica just occired to me you might have to rip the boards to do the layout not necessary- one half of the bass is fine- my mind will do the rest any way of removing the marks running across one of the boards thsnks would like to wrap today if possible so we can get started. |
mica
Moderator Username: mica
Post Number: 4531 Registered: 6-2000
| Posted on Friday, May 04, 2007 - 11:29 am: | |
Here's the two boards. 7521: and 7522: If you want to try and wrap this up today, we'll have to skip resurfacing. I think you can see pretty well through the chatter in that one region on 7521, at least enough to tell me which board you prefer for a layout line. Let me know your preference. |
flaxattack
Senior Member Username: flaxattack
Post Number: 1476 Registered: 4-2004
| Posted on Saturday, May 05, 2007 - 6:59 am: | |
thought you were posting photos with layouts mica |
mica
Moderator Username: mica
Post Number: 4537 Registered: 6-2000
| Posted on Monday, May 07, 2007 - 1:40 pm: | |
Here's the layouts, Jeff: These are rough and oversize (the chalk adds about a 1/4" all around), but you get the general idea. Let me know which one you prefer. Enjoy! |
flaxattack
Senior Member Username: flaxattack
Post Number: 1478 Registered: 4-2004
| Posted on Monday, May 07, 2007 - 2:34 pm: | |
7521 my dear its a bloomim onion but the bloom follows the outer edge very nicely? |
mica
Moderator Username: mica
Post Number: 4572 Registered: 6-2000
| Posted on Friday, May 11, 2007 - 11:44 am: | |
We ready to rip this board. In your last post, are you asking us to reverse the template on 7521? I'm not sure I understand. |