| Author | Message | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 660 Registered: 11-2006 |
Hi Mica, as said by mail, I want a master volume but, when I use my koa bass I often move a little this knob unfortunatly... and the volume become greater of course !! Have you solution to have a best position for this option ? | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 665 Registered: 11-2006 |
Ok Mica, I changed MS PC for Imac and now I lost my photoshop !! Anyway, Mac is soooo best... I can wait to have the best picture editor. Here is a picture for the position knobs/switch I want. If you have best proposition, I will agree.  | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 666 Registered: 11-2006 |
precision: put the stereo 5 pin and jack outputs at the same position as standard series I. Maybe just a little higher to let some place for the bridge pickup q-switch. But not like my koa bass :o) Thank's | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 667 Registered: 11-2006 |
Mica please forget the first idea, I was thinking this night because not to much sleep. This is the best idea for me:  Please, position the pointer knob of the pickup selector as Stanley's bass, thank's (Message edited by pierreyves on August 20, 2010) | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 669 Registered: 11-2006 |
Allô ? Somebody here ?  | ||
| mica
Moderator Username: mica Post Number: 6895 Registered: 6-2000 |
I want to work on this layout a little bit, the bass pickup Q switch is awfully close to the filter, and the master volume looks a little "stuck on" so I need to relate it to something. You want and LED on/off switch, but no stereo/mono switch for the 1/4" jack? If that's so, do you want the 1/4" jack wired in stereo or in mono? | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 670 Registered: 11-2006 |
?? exist on serie I mono/stereo switch ? Or only on the red tiger I took for example ? No Mica, no switch mono/stereo, only mono jack output if both pickups are connected on, thank's. I want to be able to play with both pickup's sound with jack. Work on this like you want if you respecxt the general idea. Yesterday night, I was playing with the Koa bass, 2 times I was hurting the master vol pot and change unfortunatly the volume... for less ! | ||
| mica
Moderator Username: mica Post Number: 6996 Registered: 6-2000 |
OK, so here's some ideas.  This one is very much like yours above, but with some more aligning and a touch more room for the master volume plus a little more room from the Q switches to their neighboring knobs. The switches themselves are slightly closer together this way. Another idea:  Leaves more room for the Q switches. Maybe this is more confusing with the bass pickup Q switch located where the treble pickup Q switch usually is, but everything has a little more room around it. You'll know which will work out best for you. And happy birthday! | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 694 Registered: 11-2006 |
Thank for your wishes Mica ! Please take the way for the first solution. I never touch the Q switches, but I could do it one day |
