The Alembic without a logo Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Showcase » Series I basses and guitars » The Alembic without a logo « Previous Next »

Author Message
sscastro
New
Username: sscastro

Post Number: 1
Registered: 2-2005
Posted on Friday, February 04, 2005 - 3:21 am:   Edit Post

Hi everybody.
I purchased this bass quite some years ago, circa 1996, and I was told then that it came from Electric Lady studios, after the recordings of that incredible "In From The Storm" album, with the music of Jimi Hendrix. With this bass there is a couple of preamps, one on the pictures, whic is a rack mount and serial number 9 and a little portable one I found inside the case.Here are some pictures I took from the bass:
bass1.jpg and the bass head basshead.jpg the bass seen from the back bassback.jpg
the next picture shows clearly the amount of wood layers used to build the bass, 10 woodlayers.jpg
the last picture is the rack mount stereo preamp preamp.jpg
sscastro
New
Username: sscastro

Post Number: 2
Registered: 2-2005
Posted on Friday, February 04, 2005 - 3:28 am:   Edit Post

Hi again
something must have gone wrong with the upload. One picture is missing and another went twice. Here is the missing one.
bass1
adriaan
Senior Member
Username: adriaan

Post Number: 484
Registered: 6-2002
Posted on Friday, February 04, 2005 - 4:49 am:   Edit Post

It does look like a pretty early Alembic, everything appears authentic except the peghead, the horns and the body laminates. All the important bits do look spot-on. Love that subtle omega, you don't see many of those around!

Perhaps an employee project?

With noone in the club owning a California Special (guitar model started in the 1980s) I guess this beauty might as well step up to claim the title.
marcm
Member
Username: marcm

Post Number: 78
Registered: 12-2003
Posted on Friday, February 04, 2005 - 5:10 am:   Edit Post

hi sergio

welcome to the club!

it's a fascinating instrument, very beautiful. it seems to me that your bass has several interesting features. first of all, it's a 'series' instrument, which means that it has single-coil pickups with a dummy humbucker (the black rectangle between the pickups) and special electronics, designed by alembic founder ron wickersham, that make make them work together. series electronics have been discussed at great length and in great detail by many contributors who are far better-informed than i am; just do a search and you will have a library of information to read

the peghead is unique to my eyes, and indeed all of the woodworking is pretty special. i've not seen a 'hippie sandwich' (that's alembic-speak for the sequence of ten wood laminates) quite like yours: it's asymmetric, which is unusual in itself (though not unprecedented), and woods are striking. the neck laminates are also very cool

the body shape, especially the slender horns and the shallow omega-cut, is also a bit different from anything i've seen. the brass backplates look much newer than the rest of the instrument, but that's just a guess

is there a serial number on the instrument itself, in addition to the s/n on the preamp? alembic keeps an information file on every instrument they've ever built; if you can find the serial number, mica can tell you when it was built, what woods were used, and many other interesting details. also, there are many experienced members who probably can provide more detailed information about your bass

congratulations! you have a beautiful vintage alembic


marc
serialnumber12
Member
Username: serialnumber12

Post Number: 87
Registered: 12-2004
Posted on Friday, February 04, 2005 - 6:27 am:   Edit Post

Very interesting oldie! however it could possibly be an early employee project if there's no s/n,but nevertheless still an alembic indeed,employee projects (which there were quite a few of)were not stamped with s/n's & very old guitars (well atleast mine, build records were kept on q cards,)and from what i understand are probably lost in rons attic somewhere.
serialnumber12
Member
Username: serialnumber12

Post Number: 88
Registered: 12-2004
Posted on Friday, February 04, 2005 - 6:31 am:   Edit Post

It's also good to see these old alembics popping up now & then now i dont feel so all alone!
endryq
Junior
Username: endryq

Post Number: 33
Registered: 3-2004
Posted on Friday, February 04, 2005 - 8:56 am:   Edit Post

The body is amazing! What a sandwich!
sscastro
New
Username: sscastro

Post Number: 3
Registered: 2-2005
Posted on Friday, February 04, 2005 - 2:29 pm:   Edit Post

thanks everbody. I can see there's a lot of Alembic users out there that know a lot about the subject. This instrument has no serial number. Removing the big back plate I could find the single Alembic pots 475-006 and the double ones 475-007. On one of the 007 there's a number written by hand: 946. The electronics and the plate from the internal side look pretty old, I mean from the 70s. Apart from the noise caused by a problem in the selector switch this bass plays incredibly. I hope some one else can throw a bit more light on this.
kungfusheriff
Advanced Member
Username: kungfusheriff

Post Number: 261
Registered: 8-2003
Posted on Friday, February 04, 2005 - 3:11 pm:   Edit Post

Wow! That's the first Input Module I've ever seen--those puppies are rare. I vote employee project, too, and ambitious at that. Stunning laminate work.
sscastro
New
Username: sscastro

Post Number: 5
Registered: 2-2005
Posted on Wednesday, February 09, 2005 - 12:32 am:   Edit Post

Hi

Is there anyone else that may have an idea of the date of construction of this apparently unofficial instrument?
Does Alembic have any register of this bass being made, or who it did belong to?
Is there also any chance of having a complete circuit diagram so that we can try to remove the noise?
Maybe Mica can answer to some or all of these questions.
dela217
Senior Member
Username: dela217

Post Number: 493
Registered: 6-2002
Posted on Wednesday, February 09, 2005 - 6:23 am:   Edit Post

I love it! The bass is an early one, but not that early. I would put it at 1978 or 1979. I would also guess that the bass was made by Bruce Becvar. Although it is not his typical headstock, he did make some like this with no logos. None of his basses (that I know of) have any serial number stampings on them either. The neck woods used in this bass seem typical of his constructions too. I would bet this was one of his basses. Probably made AT Alembic, but by Bruce. Those electronics and parts are obviously Alembic. If it is not a true Alembic, it is the next best thing. You have yourself an interesting bass there!!! You obviously have been inside of the bass. Does it have silver shielding paint inside of the cavity, or is it black? I have a Becvar bass too, and if anyone is interested, I can send pics.

What everyone on this thread is referring to as a preamp is actually an Alembic IN-2 Input Module. It is just a fancy version of a power supply. It was made between 1974 and 1978 in that configuration. Note the blue casing and the red capped knob. What it did was just help split the signal better. With a switch, you could send you signal in several different directions, to the stage and out to the mains. I have one of these units and I find them VERY useful. I think everyone with a series bass and a rack should have one! It took me years to locate one. They are hard to find indeed.

(Message edited by dela217 on February 09, 2005)
bucky
Intermediate Member
Username: bucky

Post Number: 128
Registered: 6-2003
Posted on Wednesday, February 09, 2005 - 10:56 am:   Edit Post

Hey Michael!

This bass fascinated me too! Could you post some pictures of yours? And while you're at it? I haven't been alble to find any pictures of Series I basses here at the Alembic Showcase that feature the "mustache" tailpiece that my Small Standard does. I know you said once that you had a Small Standard close in Serial# to mine (74-52) that has one. Could you post a picture so my bass and I don't feel so alone in our "mustachiness"?

Thanks!
serialnumber12
Member
Username: serialnumber12

Post Number: 99
Registered: 12-2004
Posted on Wednesday, February 09, 2005 - 11:20 am:   Edit Post

here's that link buck!:http://alembic.com/club/messages/411/1145.html?1049497080
dela217
Senior Member
Username: dela217

Post Number: 494
Registered: 6-2002
Posted on Wednesday, February 09, 2005 - 11:31 am:   Edit Post

Bucky - How about this one too:

http://alembic.com/club/messages/411/1113.html?1026683770

The two I had with moustaches were number 47 and 49 by the way.

Michael

bucky
Intermediate Member
Username: bucky

Post Number: 129
Registered: 6-2003
Posted on Wednesday, February 09, 2005 - 3:33 pm:   Edit Post

Michael, SN12:

THANKS Bros. . .cool. I'll save these pics to my Alembic Picture Library . .so Michael. . you said "had". . am I to understand you sold them?!?!? To who? Wow. . .I'll bet it was to invest in some other super-unique-collectable Alembic, maybe? 47 and 49 huh. . Wow that IS close. Did we ever talk in emails about the possibility that Rick Turner had made these? When I had my long conversation with Susan W I think she said she thought he had. But she wasn't sure. Any ideas on that?

Jeff
dela217
Senior Member
Username: dela217

Post Number: 496
Registered: 6-2002
Posted on Wednesday, February 09, 2005 - 7:16 pm:   Edit Post

Jeff - I sold number 49 a year or so ago. I sold it to a guy in England, who didn't like it and sold it right away to a friend of his. I have toyed with the idea of parting with #47, but I keep changing my mind. My thoughts were that if I don't really use them, why keep them. But I have had #47 for so long now, it would be strange not having it around.

I think that Rick probably worked on those basses back then. That was when he still worked there. Makes sense to me anyway.
valvil
Moderator
Username: valvil

Post Number: 644
Registered: 7-2002
Posted on Wednesday, February 09, 2005 - 8:19 pm:   Edit Post

I moved the thread over to this folder, since this is definitely not a California Special guitar; although it is a 'special californian' so to speak.
I figured this was a more appropriate place for it.

Valentino
bucky
Intermediate Member
Username: bucky

Post Number: 132
Registered: 6-2003
Posted on Thursday, February 10, 2005 - 1:15 pm:   Edit Post

Val:

Thanks. . sometimes we get off-topic or go off on tangents! Michael: HOLD ON TO #47. . .that's all I can say. You know in your heart-of-hearts our Small Standards are very special. . .and if you ever DO feel like you absolutely NEED to part with it, let me know first, o.k.? I would defintely be interested in having such a "close relative" of my bass living here in the house with it(-;

But don't sell it. . .you know you don't want to. .

Jeff

p.s. And believe me. . it would get played(-; I would use her as my gigging bass.
57basstra
Advanced Member
Username: 57basstra

Post Number: 392
Registered: 4-2005
Posted on Wednesday, September 27, 2006 - 7:33 pm:   Edit Post

Was this one ever positively identified as an Alembic or employee project? Fascinating!..and thanks
dtrice
Junior
Username: dtrice

Post Number: 33
Registered: 10-2006
Posted on Tuesday, April 10, 2007 - 3:36 pm:   Edit Post

To me it looks like it might be a Becvar.
sonicus
Senior Member
Username: sonicus

Post Number: 510
Registered: 5-2009
Posted on Wednesday, November 18, 2009 - 1:42 am:   Edit Post

I really like the 'IN-2"unit _____________!!!! YES!
bucky
Intermediate Member
Username: bucky

Post Number: 179
Registered: 6-2003
Posted on Wednesday, November 18, 2009 - 4:20 pm:   Edit Post

That is really a great bass you have there! What a treasure. . .

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration