74-124 Series I Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Showcase » Series I basses and guitars » 74-124 Series I « Previous Next »

Author Message
amedine
New
Username: amedine

Post Number: 7
Registered: 12-2006
Posted on Saturday, January 13, 2007 - 8:34 am:   Edit Post

New owner. This is my first Alembic (74-124).

Information from Mica on Serial Number thread: There's not many details on the early instrument records. Here's the little that I can tell you:

top: Koa
back: Walnut
body: Birch
neck: Maple and Walnut
scale: 34" long
fingerboard: Ebony, fretless
electronics: PF-6 (don't know if it's Series I or II)
originally made for L.D. Heater Music, OR
birthday: November 15, 1974
The serial number is usually on the tippy-top of the peghead like you noted.

I am looking for guidance. I am uploading some photos of the electronics, cavity and bass. Is this a Series I or II?

Any ideas on the sticker with 10/1/74 inside? Herbert Clarke Bell is written on a sticker inside the cavity and dated 10/1/74.

Can you or anyone else help with the controls on the bass and the box! Plays and sounds great although I'm not sure yet if everything is working as intended since I am new to Alembics. Thanks for any information. Allen
front
back
full
controls
electronics

(Message edited by davehouck on January 13, 2007)
lbpesq
Senior Member
Username: lbpesq

Post Number: 2016
Registered: 7-2004
Posted on Saturday, January 13, 2007 - 9:31 am:   Edit Post

Allen:

WOW!!!! Beautiful old bass. It's definitely a Series I. The Series II has rotary pots instead of toggles switches for the "Q" function. I LOVE the brass work on the back. These old ones just ooze history, don't they? I have a '76 Series I guitar, #476, but no fancy brass like your's. Enjoy and welcome to the club.

Bill, the guitar one
davehouck
Moderator
Username: davehouck

Post Number: 4703
Registered: 5-2002
Posted on Saturday, January 13, 2007 - 5:55 pm:   Edit Post

Hi Allen; a description of the controls can be found here.
hifiguy
Member
Username: hifiguy

Post Number: 66
Registered: 10-2006
Posted on Saturday, January 13, 2007 - 6:02 pm:   Edit Post

That is one incredibly cool bass, Allen.
davehouck
Moderator
Username: davehouck

Post Number: 4704
Registered: 5-2002
Posted on Saturday, January 13, 2007 - 6:18 pm:   Edit Post

As for the "box", I've never seen one like this one before. The DS-5's are a bit simpler.

Basically, the five-pin from the bass plugs in to the bottom left 5-pin connector as in the picture. If your amp is a single channel amp, run a regular quarter inch instrument cable from the middle quarter inch jack to your amp. If you have a two channel amp, you can run cables from both the middle and right hand jacks to the two channels of your amp (as in the picture). The middle jack, marked "bass", is from the neck pickup and the right hand jack, "treble", is from the bridge pickup.

The two three pin connectors on the bottom are the same as the two quarter inch connectors above except they are low impedence.

I can't make out the rest of the instructions, so I'm not sure what the left hand quarter inch jack is; I'm guessing it's a stereo jack, though I'm not sure if it's input or output.

The switch on the top right is probably a stereo/mono switch; but again I can't make out the instructions.
amedine
New
Username: amedine

Post Number: 8
Registered: 12-2006
Posted on Sunday, January 14, 2007 - 9:10 am:   Edit Post

Dave and Bill,
Thanks for the Series I ID...and the operation of the controls. These comments helped in understanding how this beauty functions. A close-up of the power supply is attached. Is this an Alembic product? Does Alembic sell new DS-5s?

I think I understand that the bass can operate on a 5-pin with the power supply or by 2-9volt batteries and a stereo 1/4-inch output. Is this correct or am I missing something? Thanks again for any information.

Paul...Thanks for the kind words.
Allencontrol label
tbrannon
Advanced Member
Username: tbrannon

Post Number: 293
Registered: 11-2004
Posted on Sunday, January 14, 2007 - 9:26 am:   Edit Post

Allen,

I can't add anything in regards to helping figure out the function of everything, but I can certainly say that you have an absolutely killer bass there.

Enjoy it~
southpaw
Intermediate Member
Username: southpaw

Post Number: 122
Registered: 12-2004
Posted on Sunday, January 14, 2007 - 2:24 pm:   Edit Post

This raises a question: When did Series II basses begin using rotary Q pots? Like lbpesq, I look for the switch or rotary pot to tell the difference but I found a couple of early examples in the Showcase Series II area that have Q switches, i.e. "78 Seriess II" & "Series II graphite".
Since this is a '74 bass there is a chance it is a Series II. It appears the late 70's is the transition period.
Beautiful bass Allen, congrats on it! Dave, Mica Or Val?

http://alembic.com/club/messages/411/25787.html?1146993313
kungfusheriff
Senior Member
Username: kungfusheriff

Post Number: 582
Registered: 8-2003
Posted on Sunday, January 14, 2007 - 5:21 pm:   Edit Post

+1 on the WOW...I remember drooling over your bass when it popped up on eBay a while back.
Congratulations, and welcome to the family!
lbpesq
Senior Member
Username: lbpesq

Post Number: 2019
Registered: 7-2004
Posted on Sunday, January 14, 2007 - 5:57 pm:   Edit Post

Paul:

Other than some construction/cosmetic differences, I believe the only electronic difference between Seies I and II is the rotary vs. toggle Q switchs. As for the two examples you gave, if you read down through the "'78 Series II" thread you'll see the discussion that it is really a Series I. As for the "Series II Graphite" thread, there is only one post - the poster who describes it as a Series II. I believe this is also in error. Toggles = I, rotary = II.

Bill, tgo
davehouck
Moderator
Username: davehouck

Post Number: 4707
Registered: 5-2002
Posted on Sunday, January 14, 2007 - 6:29 pm:   Edit Post

Allen wrote, "I understand that the bass can operate on a 5-pin with the power supply or by 2-9volt batteries and a stereo 1/4-inch output. Is this correct?"

Yes, however:

1 - Most people use the 5-pin because the series electronics use up batteries very quickly.

2 - As I understand it, and if I'm remembering this correctly, on older basses like this one regular size 9-volt batteries don't quite fit; the original batteries used back then were a little smaller.
davehouck
Moderator
Username: davehouck

Post Number: 4708
Registered: 5-2002
Posted on Sunday, January 14, 2007 - 6:47 pm:   Edit Post

With the enlarged picture, I can read the label clearly now, but I still don't know what it all means. The switch on the upper right appears to be a selector for high or low impedance. You might want to email this picture to Mica and see if she can get an explanation from Ron. Also, if Michael happens to read this thread, he may have some ideas as this box appears somewhat similar in function to the IN-2 with which Michael is familiar. And yes, I think it is indeed an Alembic power supply, but a very early and/or custom version.

The current version of the power supply is the DS-5R, a rackmount version of the DS-5.
kungfusheriff
Senior Member
Username: kungfusheriff

Post Number: 584
Registered: 8-2003
Posted on Sunday, January 14, 2007 - 10:20 pm:   Edit Post

Bill TGO and Dave are both correct, from what I remember, but I'm also curious about the typewritten and unique instructions...what appears to be a one-off bass popped up a while back with unique electronics and, most uncharacteristically, exposed polepieces, so this one isn't as odd as it might seem.
I'd love to get a few hours of play time with it, though. The hand-painted touches hiding inside the bass are really exciting and I'd love to hear what it sounds like.
Quick, everybody, take apart and photograph your old Alembics!
southpaw
Intermediate Member
Username: southpaw

Post Number: 124
Registered: 12-2004
Posted on Monday, January 15, 2007 - 8:23 am:   Edit Post

Thanks Bill, Lord knows it's hard enough to keep all the details in order on Alembics without worrying about switches vs. knobs on the Series basses. I was hoping those 2 basses were in the wrong area, all is right again... Thanks again Bill.
Paul
keavin
Senior Member
Username: keavin

Post Number: 1017
Registered: 12-2002
Posted on Monday, January 15, 2007 - 8:38 am:   Edit Post

I know my bass is seriesI W/seriesII guts, but i always thought alembic had the electronics options in the early days but decided to add the series II model & gave it a little more features than the seriesI thus creating two standard custom models to choose from..............I Love those "Carmel Candy" pickups!

(Message edited by keavin on January 15, 2007)
u14steelgtr
Junior
Username: u14steelgtr

Post Number: 42
Registered: 7-2003
Posted on Monday, January 15, 2007 - 11:00 am:   Edit Post

Does the location of the strap button on the back make it a little neck-heavy?

-- Eugene
amedine
New
Username: amedine

Post Number: 9
Registered: 12-2006
Posted on Monday, January 15, 2007 - 4:34 pm:   Edit Post

Eugene...The location of the strap button is not the original place and it is, indeed, neck heavy. I am moving it to the original location but first have to remove a 1/8 inch diameter brass insert that filled the screw hole, very nicely I might add.
strap button

Dave, I will follow up with Mica on the Power Supply. It may have been used to feed alternate amps/preamps depending on the gig. The electronics are excellent with batteries and separate neck and bridge pickup outputs to my SWR amps (dual SM-400S). I haven't mastered the controls on the power supply and am not getting great signals from the neck pickup at present. Allen
funkyjazzjunky
Senior Member
Username: funkyjazzjunky

Post Number: 604
Registered: 5-2007
Posted on Wednesday, July 28, 2010 - 9:16 am:   Edit Post

What a beautiful bass
mario_farufyno
Senior Member
Username: mario_farufyno

Post Number: 460
Registered: 9-2008
Posted on Wednesday, July 28, 2010 - 7:55 pm:   Edit Post

Incredible those engraving on brass, beautifull!
sonicus
Senior Member
Username: sonicus

Post Number: 1709
Registered: 5-2009
Posted on Thursday, March 17, 2011 - 10:56 am:   Edit Post

Beyond words_____There is some magic here !
darkstar01
Advanced Member
Username: darkstar01

Post Number: 324
Registered: 6-2005
Posted on Thursday, March 17, 2011 - 7:08 pm:   Edit Post

wow. why is it that right when i finish paying for my new upright all these amazing series basses pop up?

edit: oops, nevermind. this is from like a year ago... still. very, very nice.

(Message edited by darkstar01 on March 17, 2011)
pauldo
Senior Member
Username: pauldo

Post Number: 591
Registered: 6-2006
Posted on Friday, March 18, 2011 - 12:34 pm:   Edit Post

year ago or not - holy crap!
True piece of art - wow!
wow!

WOW!
bigredbass
Senior Member
Username: bigredbass

Post Number: 1639
Registered: 9-2002
Posted on Monday, March 21, 2011 - 10:12 pm:   Edit Post

What a find, one of the ancient masters. Present right after the creation. Very nice.

Now, as if the typewritten hieroglyphics weren't confusing enough . . . . what the hell is a 'piolet'? ? ? ?

J o e y
adriaan
Moderator
Username: adriaan

Post Number: 2769
Registered: 6-2002
Posted on Tuesday, March 22, 2011 - 9:00 am:   Edit Post

Looking at the front of the box, "piolet" must be hip for pilot light. Also digging the "sterio" spelling, btw.
poor_nigel
Intermediate Member
Username: poor_nigel

Post Number: 129
Registered: 11-2009
Posted on Tuesday, March 22, 2011 - 11:55 am:   Edit Post

I remember this bass well. I do not know if you are looking for old information posted about this bass here in the past, if so, here are some links:

http://alembic.com/club/messages/395/13569.html

http://alembic.com/club/messages/395/33812.html

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration